위성통신용 협대역 직교모드편파분리기의 설계 및 제작

Design and Fabrication of a Narrow-Band Orthomode Transducer for Satellite Communication

  • 장중호 (경북대학교 전자전기공학부 RF & Microwave 연구실 정회원) ;
  • 최현철 (경북대학교 전자전기공학부 RF & Microwave 연구실 정회원)
  • 발행 : 1999.06.01

초록

12GHz-13GHz에서 동작하는 두 개의 선형 직교 편파된 신호를 분리전송하기 위한 협대역 직교모드편파분리기를 설계 및 제작하였다. 제안된 구조는 도파관 형태의 main arm과 side arm으로 구성되어 있다. 각 모드에 대한 전송손실 및 격리도 특성을 향상시키기 위하여 계단형 도파관 트랜스포머를 설계하고 인덕티브 포스트를 삽입하였다. 설계 제작한 직교모드편파분리기의 측정결과 각 모드에 대한 전송손실은 1dB이내, 각 포트의 격리도는 20dB이상을 보였다.

This paper presents a narrow-band orthomode transducer(OMT) based on waveguide to waveguide transitions which can separate two linearly polarized orthogonal modes. This operates in the range 120Hz-13GHz frequency band. It consists of two parts, main arm and side arm. Stepped transformers are designed and an inductive post is inserted to improve the characteristics of the transmission loss and isolation. This paper also presents results from fabricated OMT These results show that the transmission loss is less than 1dB and the isolation between the ports for the OMT is above 20dB.

키워드

참고문헌

  1. Int. J. Electronics v.47 no.5 A rectangular waveguide orthomode transducer H. P. Joglekar;M. Singh
  2. IEEE Proc. v.137 no.6 Simple and Broadband orthomode transducer A. M. Boifot;E. Lier;T. Schaug-Pettersen
  3. IEEE European Communications v.2 no.5 Classifications of orthomode transducers A. M. Boifot
  4. IEEE Trans. on Mircowave Theory and Techniques v.39 no.2 Wide band orthomode transducers S. J. Skinner;G. L. James
  5. Microwave filters, Impedance matching networks, and coupling apertures G.L. Matthaei;L. Young;E. M. T. Jones
  6. IEEE Trans. on Microwave Theory and Techniques v.39 no.3 An analysis of a waveguide T-junction with an inductive post Hirokawa J.;Sakurai K.;Ando M.;Goto N.
  7. Waveguide Components for Antenna Feed Systems: Theory and CAD J. Uher;J. Bornemann;Uwe Rosenberg
  8. Time-Harmonic Electro-magnetic Fields R. F. Harrington
  9. Foundations for Microwave Engineering R. E. Collin