Mathematical Model for a Three-Phase Fluidized Bed Biofilm Reactor in Wastewater Treatment

  • Choi, Jeong-Woo (Department of Chemical Engineering, Sogang University) ;
  • Min, Ju-Hong (Department of Chemical Engineering, Sogang University) ;
  • Lee, Won-Hong (Department of Chemical Engineering, Sogang University) ;
  • Lee, Sang-Back (Department of Chemical Engineering, Cheju National University)
  • Published : 1999.03.01

Abstract

A mathematical model for a three phase fluidized bed bioreactor (TFBBR) was proposed to describe oxygen utilization rate, biomass concentration and the removal efficiency of Chemical Oxygen Demand (COD) in wastewater treatment. The model consisted of the biofilm model to describe the oxygen uptake rate and the hydraulic model to describe flow characteristics to cause the oxygen distribution in the reactor. The biofilm model represented the oxygen uptake rate by individual bioparticle and the hydrodynamics of fluids presented an axial dispersion flow with back mixing in the liquid phase and a plug flow in the gas phase. The difference of setting velocity along the column height due to the distributions of size and number of bioparticle was considered. The proposed model was able to predict the biomass concentration and the dissolved oxygen concentration along the column height. The removal efficiency of COD was calculated based on the oxygen consumption amounts that were obtained from the dissolved oxygen concentration. The predicted oxygen concentration by the proposed model agreed reasonably well with experimental measurement in a TFBBR. The effects of various operating parameters on the oxygen concentration were simulated based on the proposed model. The media size and media density affected the performance of a TFBBR. The dissolved oxygen concentration was significantly affected by the superficial liquid velocity but the removal efficiency of COD was significantly affected by the superficial gas velocity.

Keywords

References

  1. Chem. Eng. Sci. v.52 Three-phase-biofluidization-Application of three-phase fluidization in the biotechnology - A review Schugerl, K.
  2. Chem. Eng. Sci. v.52 Hydrodynamics and mass transfer in three-phase fluidized beds with non-Newtonian fluids Miura, H.;Y. Kawase
  3. Biological Fluidized Bed Treatment of Water and Wastewater Biological wastewater treatment in a three-phase fluidised-bed reactor Chatib, B.;A. Grasmick;S. Elmaleh;R. B. Aim;P. F. Cooper(ed.);B. Atkinson(ed.)
  4. Water Environ. Fed. v.71 Biological fluidized-bed treatment of wastewater from byproduct coking operations: Full-scale case history Sutton, P. M.;J. Hurvid;M. Hoeksema
  5. Biotechnol. Bioeng. v.38 Biofilm detachment mechanisms in a liquid-fluidized bed Chang, H. T.;B. E. Rittmann;D. Amar;R. Hein;O. Ehlinger;Y. Lesty
  6. M. S. Thesis A theoretical study of the oxygen reaction rate in a three-phase fluidized bed biofilm reactor CHoi, J. W.
  7. AIChE Symp. Ser.;Water Simplified mathematical models for a fluidized bed biofilm reactor Mulcahy, L. T.;W. K. Shieh;E. J. Lamotta
  8. J. Water Pollut. Control Fed. v.53 Predicting reactor biomass concentration in a fluidized-bed system Shieh, W. K.;P. M. Sutton;P. Kos
  9. J. Envuron. Eng. Division v.EE1 Fluidized bed for biological wastewater treatment Shieh, W. K.;A. M. Asce;L. T. Mulcahy
  10. Biochemical Engineering Fundamentals(2nd ed.) Bailey, J. E.;D. F. Ollis
  11. Biotechnol. Bioeng. v.22 Suggested kinetic model for the fluidized-bed biofilm reactor Shieh, W. K.
  12. Chem. Eng. J. v.37 Effectiveness factors for bioliquid with monod kinetics Andrews, G.
  13. Chem. Eng. J. v.3 Transfer of oxygem across the gas-liquid interface in gasliquod fouidused beds φ stergaad, K.;P. Fosbol;P. Fosbol
  14. I. & E. C. Des. Develop v.10 Bed porosities in gas-liquid fluidization Dakshinamurty, P.;V. Subrahmantam;J. N. Rao
  15. Adv. Chem. Eng. v.7 Gas-liquid-particle operations in chemical reaction engineering φ stergaad, K.;T. B. Ftre(ed.);G. R. Coklet(ed.);J. W. Hoopes. Jr;T. Vermeulen(ed.)
  16. I. & E. C. v.62 Unified design method for continuous-contact mass transfer operations Pavlica, R. T.;J. H. Olson
  17. Gas-Liquid-Solid Reactor Design Shah, Y. T.
  18. Chem. Eng. Sci. v.6 Boundary conditions of flow reactor Wehner, J. F.;R. H. Wilhelm
  19. Chem. Eng. J. v.18 Liquid dispersion in gas-liquid fluidized Beds El-Temtany, S. A.;Y. O. El-Sharnoubi;M. M. El-Halwagi
  20. Gas-Liquid-Solid Fluidization Engineering Fan, L. S.
  21. J. Water Pollut. Control Fed. v.48 A model of substrate utilization by bacterial films Williamson, K.;P. I. McCarty
  22. Numerical Analysis;A practical Approach Maron, M. J.
  23. Biometrics v.30 A package of computer programs for pharmacokinetic modeling Metzler, C. M.;G. L. Elfring and A. J. McEwen