센서학회지 (Journal of Sensor Science and Technology)
- 제8권3호
- /
- Pages.247-252
- /
- 1999
- /
- 1225-5475(pISSN)
- /
- 2093-7563(eISSN)
산소센서용 CTA/PCL 효소고정화막과 반투막을 단일화한 PVA적층막의 제조 및 특성
Preparation and Characteristics of a Single-layer PVA Laminated CTA/PCL Membrane for Oxygen Biosensor Electrode
- Seo, Jong-Won (Div. of Life Science, Suwon Univ.) ;
- Kim, Tae-Jin (Div. of Polymer & Chemical Eng., Suwon Univ.) ;
- Jeong, Yong-Seob (Dept. of Food Scien. & Techn., Chonbuk Nat'l Univ.) ;
- Yoon, Jeong-Weon (Div. of Life Science, Suwon Univ.)
- 발행 : 1999.05.31
초록
바이오센서로 이용되는 산소센서에는 효소고정화막과 함께 반투성막이 필요한데, 이러한 두 층의 막은 취급이 쉽지 않아서 상업화하기가 불리하므로, 이 두 막을 하나의 적층막으로 제조하였다. cellulose triacetate/polycarprolactone(CTA/PCL)막에 1,1'-carbonyl diimidazole(CDI) 방법으로 glucose oxidase, ascorbate oxidase, pyrubate oxidase와 alcohole oxidase 등의 효소를 고정화시킨 다음, 그 위에 polyvinylalcohol을 알데하이드와 산과 혼합하여 적층방법으로 단일막을 제조하였다. 고정화된 이 적층막을 산소전극에 부착하여 glucose, ascorbate, pyrubate, ethanol의 농도에 따른 전류변화를 측정한 결과, 각각 5-10mmol 이내의 기질농도에서
The oxygen electrode of a biosensor needs enzyme immobilized membrane and a dialysis membrane to measure the oxygen concentration that remains after an enzyme reacts with its substrate. Accodingly, a single-layer PVA laminated CTA/PCL membrane was developed as an oxygen biosensor electrode. The enzymes were immobilized on a cellulose triacetate/polycarprolactone membrane using the 1,1'-carbonyl diimidazole(CDI) method, and then laminated with polyvinyl alcohol, aldehyde and acid. The alcohol oxidase and PVA laminated CTA/PCL membrane was tested with various concentration of enzyme substrates using a Yellow Springs Instrument(YSI) oxygen sensor. Under 5-10mmol substrates produced
키워드