Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Stacking Sequence on the Application of the Single Specimen Technique to CLS Specimen

단일시편방법의 CLS 시편 적용시 적층성이 미치는 영향

  • Published : 1999.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

The work factor approach, so-called single specimen technique could be used to determine energy release rate from a single test record for unidirectional CLS specimen. In the present study, the work factor approach was extended to determine the mixed-mode fracture toughness of multi-directional graphite/epoxy laminated composites. Multi-directional CLS specimens were used for fracture tests. The stacking sequences used for the lap and the strap were $[90_2/0_2]_s/[0_4/90_4]_s$ and $[0/\pm45/0]_s/[0_2/\pm45_2/0_2]_2$, respectively. For both cases, the fracture toughness determined from the work factor approach was compared with that determined from the compliance method. It was found that both methods produced fracture toughness within a maximum 15% difference for each stacking sequence. The fractography analysis also showed that the fiber bridging occurred for$[0/\pm45/0]_s/[0_2/\pm45_2/0_2]_2$ case while it did not occur for $[90_2/0_2]_s/[0_4/90_4]_s$ case.

Keywords

References

  1. Mode I and Mode II Fracture Toughness Measured Between Differently Oriented Plies in Graphite/Epoxy Composites Chou, I.;Kimpara, I.;Kageyama, K.;Ohsawa, I.
  2. Composite Science and Technology v.56 Measurement of Mixed-mode Delamination Fracture Toughness of Unidirectional Glass/Epoxy Composites with Mixed-mode Bending Apparatus Benzeggagh, M.L.;Kenane, M.
  3. 대한기계학회논문집 A권 v.22 no.3 모드 I 하중 조건하에 있는 다방향 적층 복합재료의 층간파괴거동 최낙삼;Kinloch, A.J.
  4. J. of Composite Technology and Research v.8 Preliminary Design of Cracked Lap Shear Specimen Thickness for Delamination of Interlaminar Fracture Toughness Mangalgiri, P. D.;Johnson, W.S.
  5. J. of Engineering Materials and Technology v.106 Geometrically Nonlinear Analysis of Adhesively Bonded Joints Dattaguru, B.;Everett, R. A. Jr.;Whitcomb, J. D.;Johnson, W. S.
  6. J. of Testing and Evaluation v.15 Stress Analysis of the Cracked-Lap-Shear Specimen: An ASTM Round-Robin Johnson, W. S.
  7. Fatigue Growth, Deflection, and Crack Opening Displacement in Cracked Lap Shear Specimens Poursartip, A.;Chinatambi, N.
  8. J. of Composite Materials v.29 Delamination Fracture Criteria for Composite Laminates Hwu, C.;Kao, C. J.;Chang, L.E.
  9. J. of Composite Materials v.27 A Study on the Application of Work Factor Approach to Composites Laminates Rhee, K. Y.;Ernst, H. A.
  10. Transactions, Royal Society of London, A v.221 The Phenomena of Rupture and Flaw in Solids Griffith, A. A.
  11. J. of Materials Science and Letters Stacking Sequence Effect on the Elastic Work Factor of CLS Composite Specimen Rhee, K.Y.