4 수신기를 이용한 GPS 다중경로의 검출과 축소

Detection of GPS Multipath Errors Using 4-Receivers

  • 박운용 (동아대학교 공과대학 건설공학부) ;
  • 정창식 (동아대학교 공과대학 건설공학부) ;
  • 김진수 (동아대학교 대학원 토목공학과) ;
  • 곽두호 (동아대학교 대학원 토목공학과)
  • 발행 : 1998.12.01

초록

본 연구는 GPS 보조에 의한 항공삼각측량 및 자동차량항법장치 등과 같은 고정밀 측량에서 주요 오차 원인이 되고 있는 다중경로 오차를 검출하고 이를 요구 정확도로 축소시키는데 그 목적이 있다. 수신점의 다중 수신기를 고정한 후 동적 수신기가 연속적으로 이동할 때, 망조정시 smoothed코드 측정과 순수 코드 측정을 실행하여 동적수신기에 대한 단차분법 코드파 위치 해석에서 3차원 RMS 오차가 약 30% 축소됨을 알 수 있었다. 이러한 망조정들은 다중 수신점에서 실행되었지만, 위치결정은 항상 동적 수신기와 하나의 기준 수신점 사이의 단차분법에 의해 실행된다는 것에 근거한 것이고, 서로 매우 근접한 수신기로부터 이중차를 이용하여 대기 오차를 포함한 모든 상관성 오차를 상당히 축소할 수 있을 뿐만 아니라 다른 처리 기법들과 조합하여 사용할 있으리라 생각된다.

This study aims to detect and to reduce the multipath errors which are main errors source in high precious surveying such as GPS-aided aerial triangulation and Car Navigation. which reference receivers being fixed, when kinematic receivers move continuously, multipath is performed using smoothed code measurement and pure code measurement in the network. Through this methods, 3D RMS errors are reduced into about 30% in the single differential code solution to the kinematic receiver. This is based on the fact that the network adjustment are performed at multiple reference receivers, but positioning is carried out by the single differential methods between a reference receiver and a kinematic receiver. So it was supposed that this methods reduced the correlation errors including the atmospheric errors using the nearest receivers and can be mixed with another methods.

키워드