Nimonic 80A 초내열합금의 경도와 전기화학적부식에 미치는 시효열처리의 효과

The Effects of Aging Heat Treatments on the Hardness and Electrocemical Corrosion for the Nimonic 80A Superalloy

  • 나은영 (목포해양대학교 대학원 기관공학부)
  • 발행 : 1998.09.01

초록

In this paper the Hardness and Electro-chemical corrosion of the Nimonic 80A superalloy were studied. It aging heat treatments was carried out at $650^{\circ}C$, $700^{\circ}C$, $750^{\circ}C$,$800^{\circ}C$ and $850^{\circ}C$ with different time of 20min , 30min 1hour, 2hours, 4hours, and 16hours additionally 64hours and 128hours at $650^{\circ}C$. The obtained results were as follows; 1. As aging temperature increased the time for the maximum hardness was reduced from 128hours at $650^{\circ}C$ to 30min at $850^{\circ}C$ whereas the highest hardness was reduced from Hv 381 at $650^{\circ}C$ to Hv 321 at $850^{\circ}C$. 2. In the Electro-chemical corrosion test as a function of aging heat treatment time and tem-perature the corrosion potential was reversely proportional to Hardness which indicated the effects of ${\gamma}/{\gamma}'$ coherency of base material and precipitate. 3. Initiation point of the pitting was observed at grain boundary twin boundary and near${\gamma}'$ pre-cipitates. The results of composition analysis by EDS at this point indicated that sulphur originat-ed from 1N $H_2SO_4$ solution was found in depletion at the grain boundaries and the pit which arouse in the near precipitates were lack of Al Ti and Ni which are the main element of ${\gamma}'$ The depletion of such element was cause breakdown of passive film.

키워드

참고문헌

  1. 日本舶用機關學會誌 v.50 no.3 安藤秀男
  2. Motorship Special Supplement Max Briner
  3. The Nimonic Alloys(2nd ed.) W. Betteridge(et al)
  4. The Development of Gas Turbine Materials G. W. Meetham
  5. The Superalloys C. T. Sims(et al)
  6. The Structure and Properties of Engineering Alloys W. Smith
  7. Script. Metall v.19 no.7 S. Sadig;D. R. F. Weet
  8. Phys. Met Metall v.58 no.2 A Tsaregorod Tsen(et al)
  9. Acta Metall v.33 no.10 V. Paiar
  10. Acta Metall v.33 no.9 E. M. Sehulson(et al)
  11. Acta Metall v.31 no.2 R. A. Ricks(et al)
  12. Metallurgical Transaction A v.13A no.1 S. Floreen;R. H. Kang
  13. Metallurgical Transaction A v.14A no.2 A. K. Koul;W. Wallcc
  14. Metallurgical Transaction A v.16A no.5 B. Mishira;A. D. Sinka;J. Moore
  15. Welding Research Supplement M. L. Santella;S. A. David
  16. Acta Metall v.33 no.7 R. Vinent
  17. Anti Corrosion C. A. Smith
  18. Annual Book of ASTM Standard v.03 no.02 ASTM G5-81
  19. Annual Book of ASTM Standard v.03 no.02 ASTM A262-86
  20. International Metals Reviews v.28 no.1 R. Thamburaj(et al)
  21. Metallurgical Transaction A v.12A no.9 D. A. Grose;G. S. Ansell
  22. Acta Metall v.30 no.2 B. Reppich
  23. Metallurgical Transaction A v.16A no.7 S. K. Kang;R. C. Benn
  24. Z. Metallkde v.72 no.8 M. A. Tada
  25. Acta Metall v.33 no.5 C. H. V. Ko Pezky(et al)