Journal of the Korean Society for Nondestructive Testing (비파괴검사학회지)
- Volume 17 Issue 1
- /
- Pages.23-30
- /
- 1997
- /
- 1225-7842(pISSN)
- /
- 2287-402X(eISSN)
Characteristics of High Frequency Ultrasonic Transducer Employing Polyvinylidene Fluoride and Detectability of Flaw in Cr-Ni Steel
PVDF 수침용 고주파수 초음파 탐촉자의 검출장과 Cr-Ni 강에서의 결함 검출능 측정
- Kim, Byoung-Geuk (NDE Group, Failure Prevention Research Center Korea Research Institute of Standards and Science) ;
- Lee, S.S. (NDE Group, Failure Prevention Research Center Korea Research Institute of Standards and Science)
- Published : 1997.04.14
Abstract
Recently high frequency ultrasonic transducers to employ polyvinylidene fluoride(PVDF) or polyvinylidene fluoride trifluoroethylene P(VDF-TrFE) have been used to detect small flaws in immersion testing. The detection field depending on the water path between the transducer and a specimen and the path in a tested specimen was measured using a PVDF transducer with nominal frequency 80MHz. Also, C-scan and B-scan were performed for the specimens made of Cr-Ni steel with the artificial flaws, the flat-bottom holes with diameter ranging from
최근 시료 내부의 미세 결함의 측정을 위하여 초음파의 발생 소자로 polyvinylidene fluoride(PVDF)나 polyvinylidene fluoride trifluoroethylene P(VDF-TrFE) 압전 재료를 사용한 광대역 고주파수 초음파 탐촉자가 이용되고 있다. 중심 주파수 80MHz의 PVDF 수침용 집속형 초음파 탐촉자의 특성과 물과 시료에서의 초음파의 검출장을 측정하였으며 강재 시편에서의 결함 검출능을 측정하였다. 물과 강재 시험편에서 고주파수 초음파의 감쇠가 결함 검출능을 좌우하는 주요 변수이었다. 작은 결정립을 지닌 크롬-니켈강 재료를 사용하여 12mm 깊이에 직경
Keywords