한국표면공학회지 (Journal of the Korean institute of surface engineering)

  • 제30권4호
  • /
  • Pages.239-247
  • /
  • 1997
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지

전해가공 시의 정밀도위 향상을 위한 음극 설계와 모사

Cathode design and simulation in electrochemical machining

  • 유시철 (서울대학교 공과대학 자원공학과) ;
  • 조수익 (서울대학교 공과대학 자원공학과) ;
  • 손헌준 (서울대학교 공과대학 재료공학부) ;
  • 강탁 (서울대학교 공과대학 재료공학부)
  • Yu, S. C. (Dept. of Mineral and Petroleum Eng., Seoul Nat. Univ.) ;
  • Jo, S. I. (Dept. of Mineral and Petroleum Eng., Seoul Nat. Univ.) ;
  • Sohn, H. J. (School of Material Science and Eng., Seoul Nat. Univ.) ;
  • Kang, T. (School of Material Science and Eng., Seoul Nat. Univ.)
  • 발행 : 1997.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The electrochemical machining of carbon steel was carried in various electrolytes which contain NACl and $NaCIO_3$. Though electrolyte containg NaCl yields fast machining rate, dimensional control is rather difficult. In the case of electrolyte with $NaCIO_3$, dimensional control of anode shape can be obtained through modification of cathode design. Mathematical modeling is also performed for these systems and agreements are good compared with experimental date. The constant gap experiment butween two electrode yielded faster machining rate than constant cathode moving rate experiment.

키워드