Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Numerical and experimental analysis of temperature distribution in TEFC induction motor

전폐형 유도전동기의 온도분포에 관한 수치 및 실험적 해석

  • 윤명근 (서울대학교 대학원 기계공학과) ;
  • 고상근 (서울대학교 기계공학과) ;
  • 한송엽 (서울대학교 전기공학과) ;
  • 이양수 (서울대학교 대학원 전기공학과)
  • Published : 1997.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

We studied the temperature distribution and heat transfer characteristics of TEFC induction motor with thermal network program for more efficient design and better cooling performance of it. We knew the characteristics and the windage loss of outer cooling fan from fan test experiments. Frame axial and peripheral heat transfer coefficients and endwinding heat transfer coefficient were measured by various model experiments and then, compared with other experimental results. Frame was the main heat transfer surface, load-side and fan-side surface were not thermally symmetric from the heat flux distribution analysis. Steady and unsteady temperature distributions were measured by real motor experiments. From the results, we knew that rotor surface temperature was higher than coil temperature and the hottest spot in the coil was loadside endwinding outside surface. We compared the simulation results with those of real motor test and the two results showed a good agreement.

Keywords

References

  1. IAEA Safety Series no.6 Regulations for the Safe Transport of Radioactive Materials IAEA
  2. 과학기술처 고시 v.85 no.8 방사성물질등의 포장 및 운반에 관한 규정 과학기술처
  3. NRC Packaging of Radioactive Material for Transportation of Radioactive Material under Certain Condition US NRC
  4. Energy Absorbing Characteristics of Materials Hill, T. S.;Joseph, W. W.
  5. An Assessment of Stress-Strain Data Suitable for Finite-Element Elastic-Plastic Analysis of Shipping Containers Rack, H. J.;Knorovsky, G. A.
  6. Experimental Studies of Dynamic Impact Response with Scale Models of Lead Shielded Radioactive Material Shipping containers Robinson, R. A.;Hadden, J. A.;Basham, S. J.
  7. The Validity of Scale Modeling for Large Deformations in Shipping Containers Burian, R. J.;Blark, W. E.;Lawrence, A. A.;Balmert, M. E.
  8. Evaluation of Impact Limiter Performance During End-on and Slapdown Drop Tests of a One-Third Scale Model Storage/Transport Cask System Yoshimura, H. R.;Bronowski, D. R.;Uncapher, W. L.;Attaway, S. W.;Bateman, V. I.;Carne, T. G.;Gregory, D. L.;Huerta, M.
  9. Computer Methods in Applied Mechanics and Engineering v.33 no.3 Large Deformation Inelastic Analysis of Impact for Shipping Casks Charman, C. M.;Grenier, R. M.;Nickell, R. E.
  10. Finite-Element Analysis of Radioactive-Material Shipping Packages Sutherland, S. H.;Yoshimura, H. R.;Huerta, M.
  11. Three Dimensional Finite Element Impact Analysis of Nuclear Waste Truck Cask Miller, J. D.
  12. Nuclear Engineering and Design v.78 no.3 A Round Robin on Numerical for Impact Problems Yagawa, G.;Ohtsubo, H.;Takeda, H.;Toi, Y.;Aizawa, T.;Ikushima, T.
  13. Comparison of Structural Computer Programs Used for the Analysis of Spent Fuel Shipping Casks Friley, J. R.
  14. Structural Code Benchmarking:Impact Response Resulting from the Regulatory Nine-Meter Drop Glass, R. E.;Frilley, J. R.;Obata, H.;Nakae, T.;Itoh, M.;Rasmusson, P.
  15. Methods for Impact Analysis of Shipping Containers Nelson, T. A.;Chun, R. C.
  16. Nuclear Engineering and Design v.114 no.1 Free Drop Impact Analysis of Shipping Cask Pfeiffer, P. A.;Kennedy, J. M.
  17. Int. Jr. of Impact Engineering v.13 no.4 Calculation of Impact Loads for High Energy Drops of Cylindrical Containers Miller, G. K.
  18. UK AEE Winfrith Three-Dimensional Effects in Flask Impact Testing Cooper, C. A.;Neilson, A. J.;Butler, N.;Bazell, C. J.
  19. Trans. of the 12th Int. Conf. on Structural Mechanics in Reactor Technology v.J Finite Element Analysis for the Impact Behaviour of a Cask Interacting with a Rigid Pin Altes, J.;Geiser, H.;Volzer, W.;Frenk, A.;Deeken, G.
  20. Proc. of the 1993 Int. Conf. on Nuclear Waste Management and Environmental remediation v.1 Mechanical Interaction Between Rock, Buffer and Canister in Repositories Borgesson, L.
  21. KSC-4 수송용기 안전성분석 보고서 강희영(외 15인)
  22. 대한기계학회논문집 v.18 no.11 낙하충격을 받는 방사성물질 수송용기의 동적거동에 관한 연구 이영신;김용재
  23. ABAQUS Theory Manual Ver. 5.3
  24. ABAQUS/Standard User/s Manual Ver. 5.3
  25. Rules for Construction of Nuclear Power Plant Component ASME
  26. Finite Element Procedures for Contact-Impact Problems Zhong, Z. H.
  27. 대한기계학회논문집 v.19 no.12 경사낙하충돌조건하의 사용후핵연료 수송용기의 동적거동에 대한 유한요소해석 구정희;서기석;강희영;김영진
  28. Kobe Steel Engineering Reports v.39 no.2 Drop Impact Analysis of Spent Fuel Transportation Packaging Shirakura, T.;Fukuda, Y.