서브밴드 및 넌세그먼트 주파수대에서 어드레스 코딩을 사용한 FH / MFSK 시스템의 성능 분석

Performance Analysis of Multitone FH/MFSK System with Stage Address Coding in Subband and Nonsegmented Frequency Band

  • 발행 : 1996.12.01

초록

메세지당 비트 수와 주파수 도약 시권스의 톤의 수는 유효한 대역폭과 각 사용자의 데이터율에 의해 결정된다. 이 파라메터는 번갈아 톤 구간을 결정하여 전송 왜곡에 많은 영향을 미친다. 본 논문에서는 충돌이나 히트를 감소하기 위해서 확산 부호를 각 이용자 쌍에게 할당하는 어드레스 코드를 사용하였다 또한 주파수대는 몇 개의 서브 밴드로 나누어 각각의 사용자는 칩당, 서브 밴드당 멸티톤 전송이 가능하고 주파수 총수의 증가에 의한 각 톤의 구간을 늘릴 수 있도록 새로운 시스템을 제안하였다. 그리고, 비트수, 톤의 길이, 칩당 주파수의 최적 값에 의해 오율성능 개선치를 구하였다. 전반적인 효율 하락 없이 다중 통과 지연 분포의 취약성이 작아지며 동시에 사용자 수가 50% 증가함을 알았다. 또한 사용자 비율에 따른 대역폭 변화에 대한 확산 시스템의 효율이 20% 증진함을 알 수 있었다.

The number of bits per message and the number of tones in the frequency-hopping sequence are determined by the available bandwidth and the data rate of each user. These parameters in turn determine the tone duration which strongly influences the vulnerability of the system to transmission distortions. In this paper, an address code which is assigned to each individual user was employed in order to reduce the collisions or hit. Also the frequency band is divided into several subbands and each user transmits multitone frequency per subband per chip. And the new system which is to increase the duration of each tone by increasing the total number of system frequencies that has been proposed. It is found that an optimum value bit, tone, number of frequencies per chirp can improve the err performance. This flexibility slightly increases maximum efficiecy and makes the the system less vulnerable to multipath delay. So, It is found that as the nuber of user increased 50%, the efficiency as a tuncion of the bandwidth to user'rate ratio improve 20%.

키워드