A Study on the Flow Characteristics of the Mixture in an Intake Manifold

흡기관 내의 혼합기 유동 특성에 관한 연구

  • Published : 1996.01.01

Abstract

The behaviors of the mixture at the downstream of throttle valve in a TBI type gasoline engine plays a greater role in design of intake system. A good mixture has been influencing directly not only on the engine power but also on the pollutant emission. The mixture flow in an intake manifold is very complex, and the flow characteristics are varied with the valve type, valve angle, inlet air flow rate, and the other flow factors. Three kinds of valve are chosen in this study, and the informations of the mixture flow are observed experimentally using a PIV apparatus. Perforate valve has a smaller recirculation zone than the case of solid valve with a lower valve loss coefficient, and iti is verified that the perforated valve is also suitable to control the flow rate in a mixture flow system.

Keywords

References

  1. SAE Tech. Paper Series 590678 Analysis of Fuel Behavior in the Spark-Ignition Engine Start-Up Process M. J. Sampson;J. B. Heywood
  2. T. of ASME,J. of Engineering for Gas Turbine and Power v.112 Valve Event Optimization in a Spark-ignition Engine D. N. Assanis;M. Polishak
  3. JSAE Review v.12 no.1 Analysis of Gas Flow in the In take Manifold of Gasoline Engines M. Fusieda;Y. Ohyama, M. Ooshuga;T. Nogi
  4. T. of ASME, J. of Fluids Engineering v.110 Performance of Butterfly Valves as a Flow Controller K. Eom
  5. Proceeding of the 23rd FISTA Congress v.1 Practical Measuring Method of Deposited Fuel and Evaporated Fuel in the induction System H. Monden;R. kataoka
  6. 대한기계학회논문집 v.19 no.11 연료 분사장치의 혼합기 형성에 관한 연구 이창식;이기형;조병욱;서영호