Abstract
The (polymer/carrier) composite membranes for separating the metallic ion have been prepared by the water cast-method. The morphology of these membranes was affected by the physical properties of the spreading solution. The surface tension of the (polymer/18-crown-6) composite solution was decreased with increasing the concentration of 18-crown-6 compound and the surface tension of polymer solution decreased the following order PVC>PS>CA. The viscosity of CA solution decreased with increasing the contents of the 18-crown-6 compound, but PVC and PS solutions showed no significance changes according as the concentration of 18-crown-6 compound. In the composite solutions, the spreading ability was improved by' the cyclic 18-crown-6 molecules which acted as an electric buffer and diminished the intermolecular force between the polymer chains. The (polymer/18-crown-6) composite membrane was more uniform than that of the mono polymer membrane on the coagulation state of polymer, and the top and bottom sides of membrane showed also the more smooth structure according as the concentration increment of 18-crown-6 molecule.
금속이온 분리를 위한 운반체 지지형 (고분자/운반체) 복합막을 수면전개법에 의하여 제조하였다. 이들 막의 형상은 전개용액의 물성에 의하여 영향을 받는다. (고분자/18-crown-6) 복합용액의 표면장력은 18-crown-6의 농도가 증가함에 따라 감소하는 경향을 나타내며, 고분자에 따른 용액의 표면장력은 PVC>PS>CA 순서로 감소하였다. 점도는 18-crown-6의 농도가 증가함에 따라 PVC계와 PS계 용액은 큰 변화가 없으나 CA계 용액은 감소하는 경향을 나타내었다. 18-crown-6 환형고리분자는 고분자쇄 사이에서 전기적인 완충역할을 하여 고분자쇄간의 분자간력을 약화시켜줌으로써 복합 용액의 전개성을 증가시켰다. 복합박막의 표면형상은 단일박막보다 균일하였으며, 18-crown-6가 증가함에 따라 전후면은 모두 균일한 구조극 나타내었다.
