초록
원호형 문비(tainter gate)의 진동현상과 동적 거동을 규명하기 위하여 모형시험이 수행되었다. 자유수면을 갖는 수로에 설치된 문비 모형에서 개방고와 상하류 수위차에 의한 수직, 수평 진동현상이 측정되었으며, 단판으로 구성된 원호형 문비의 가로보에 와류현상이나 파랑으로 인한 진동영향을 검토하기위하여 문비 하류부에 널판지를 부착하여 위치변화에 의한 이중판 효과를 실험하였다. 또한 문비 인양시 인양 속도에 따른 진통영향을 검토하였으며 문비 바닥에 부착된 고무 seal의 위치에 따른 흐름현상과 진동영향을 실험하였다. 원호형 문비의 탄성모형에 의한 진통실험은 국내에서 처음 시행되는 것으로, 위와 같은 실험을 통하여 원호형 문비의 동적 특성을 도출하고, 진동을 줄일 수 있는 문비 형상을 제시한다.
A model test was performed for tainter gate to find out dynamic phenomena and behaviors. In the submerged tainter gate models in free-surface flow, vertical and horizontal vibrations were tested under the different gate openings and water level conditions. In order to investigate the vibration on the transverse beams of the tainter gate in single plate due to shear-layer vortices and waves, gate models with various panel type in downstream side were conducted. Also vibrational phenomena and dynamic behaviors due to lifting velocity and to position of rubber seal at gate bottom were experimented. Resultantly in this paper, the dynamic characteristics of tainter gate were discussed. Gate bottom geometries to reduce the amplitudes of vibration were presented through model tests.