기공율, 응력 및 입자 크기가 B-H Hysteresis loop 특성에 미치는 영향 연구

The study on effects of porosity, strain and grain size on B-H Hysteresis Ioop

  • 김성재 (국방과학연구소 기술연구본부 3부) ;
  • 정명득 (국방과학연구소 기술연구본부 3부) ;
  • 백종규 (국방과학연구소 기술연구본부 3부)
  • 발행 : 1994.04.01

초록

Mg-페라이트에 있어서 B-H hysteresis loop 특성에 미치는 소결체의 밀도, 내부 응력, 입자 크기의 영향을 조사하였다. 밀도가 증가함에 따라서 보자력은 감소하였으며 각형비는 증가 하였다. 보자력은 내부 응력에 매우 의존적이었으며 시편 내부에 응력이 존재할때 보자력은 1.95 [Oe]에서 4.35[Oe]로 증가하였다. 그러나 각형비는 큰 차이가 없었다. 입자 크기가 6-11[um] 범위 내에서의 보자력 및 각형비는 입자 크기에 의존성을 갖지 않았다.

Effects of density, inner-stress, and grain size on B-H hysteresis loop properties of Mg-ferrite were investigated. As the sintered bulk density increase, coercive force($H_c$) decreasand squareness ratio increase. Coercive force was very dependent on inner-stress in sintered body, so coercive force increase from 1.95[Oe] to 4.35[Oe] when inner stress present in bulk, however, the squareness ratio was almost not changed Coercive force and squareness ratio were independent on grain size of sintered body which is between 6-11[$\mu\textrm{m}$]

키워드

참고문헌

  1. Ferromagnetic Materials v.2 E.P.Wohlfarth
  2. Modern Ferrite Technology Alex Goldman
  3. J. Am. Ceramic Soc. v.38 no.10 George Economos
  4. 磁性の理論 3 Andre herpin
  5. 한국요업학회지 v.19 no.3 이홍림;최승철