캔틸레버공법 PC 세그멘탈 다경간 교량의 처짐 및 단면력 검토를 위한 축소모델에 관한 연구

Reduced Model of the PC Segmental Multispan Bridge Constructed by Free Cantilever Method for Investigation of Deflection and Member Force

  • 투고 : 1993.01.05
  • 발행 : 1993.09.30

초록

프리스트레스트 콘크리트 구조물의 설계에 있어서 적절한 단면 및 소요 강선량의 결정을 위하여 구조해석을 여러번 수행하게 되는 것이 보통이다. 그러나 PC 세그멘탈 다경간 교량의 경우 콘크리트 및 강선의 시간의존적인 성질, 시공순서에 따른 구조계의 변화등을 고려한 구조해석에 많은 노력과 시간이 필요하게 되므로 다경간 교량에 대한 축소 교량모델을 가정하여 구조해석을 수행하기도 한다. 본 연구에서는 캔틸레버 공법으로 가설되는 10 경간 PC 세그멘탈 교량을 대상으로 5 경간 및 3 경간으로 축소시킨 교량모델을 가정하고 이에 대한 구조해석을 수행하여 처짐 및 모멘트의 계산 결과를 비교하므로써 축소 교량모델의 적합여부를 검토하였다. 또한 프리스트레스트 콘크리트의 극한모멘트 계산을 위한 하중계수 적용 방법에 대하여 고찰해 보았다.

In design of prestressed concrete structures, structural analysis is performed normally several times for selection of adequate sectional dimension and tendon amount. Especially for precast segmental multi-span bridges. time consuming structural analysis process due to time dependent material properties and structural system change could be effectively reduced by use of a reduced-span bridge model. 5-span and 3-span bridges are selected as reduced-span models for the 10-span full bridge to investigate the acceptability in practical design. The analytical results of deflection, total moment, statical moment, and ultimate moment of the reduced span-models are compared with those of the 10-span full bridge. Application of the load factors to structural analysis for ultimate moment calculation in prestressed concrete is reviewed and a rational method is proposed.

키워드