Measurements of Thermal Diffusivity of Heavy Rolled Low Carbon Steel Plate With Laser Flash Technique

레이저 섬광법에 의한 압연된 저탄소강 판재의 열확산계수 측정

The heat transfer problem associated with pulse technique for measuring thermal diffusivity was solved by means of Green function. The obtained general solution was discussed so as to apply for all possible cases; kinds of boundary condition and heat source, irradiation positions of heat pulse, radius of heat pulse, one-and two-dimensional heat flow, finite pulse time effects and radiation heat loss systems. Experimentally, the laser flash lamp was used as heat source for measuring thermal diffusivity of low carbon, aluminium chilled steel plate, which was heavily rolled in order to measure the variation of thermal diffusivity in the temperature range from room temperature through 500.deg. C. The derived results are (1) materials produced from same furnace showed a somewhat different thermal diffusivity values. (2) the thermal diffusivity value of rolled material was smaller than unrolled material and the difference decreased as increasing temperature. (3) the thermal diffusivity value of an annealed and temper rolled material was larger than the value of a cold rolled material, even thought smaller than unrolled material. (4) In case of heavy rolled material, there was no consistent relationships between the thermal diffusivity and the reduction in thickness.

본 연구에서는 저탄소강 판재가 소성변형을 하면 열확산계수가 변화하는가를 구명하려는 것이다. 재료의 소성변형은 압연법을 이용하며, 고온압연, 열간압연 및 냉간압연법으로 재료를 제작하여, 압연률을 변화시키면서 압연방법 및 압연률에 따르 는 변화를 규명하려 한다. 열확산계수의 측정은 레이저 섬광법으로 하며 온도를 실 온에서 500.deg. C 근처까지 변화시키면서 측정한다.