Journal of Welding and Joining
- 제8권2호
- /
- Pages.70-79
- /
- 1990
- /
- 2466-2232(pISSN)
- /
- 2466-2100(eISSN)
열간압연에 의한 스테인레스 클래드강 제조
Fabrication of stainless clad steel by hot rolling
초록
Stainless clad steels were made through hot rolling process. Backing plates employed in this study were HSLA steel and mild steel. The shear bond strength increased with an increase of the soaking temperature and time. It was also found that the shear bond strength increased with an increase of the reduction ratio. The threshold deformation was observed to be 20% and 10% respectively when the soaking conditions of 15 min. at 900.deg. C and 30 min. at 1000.deg. C were applied. Either the rolling or the transverse direction did not give any significant difference in the shear bond strength. Stainless steel-HSLA steel was superior to stainless steel-mild steel in the same range of magnitude. Because the above experimental results were in contrary to the existing mechanisms, the new model was proposed to describe the bonding mechanism and the void formation.
키워드