A Study on Shear-Fatigue Behavior of Reinforced Concrete Beams

철근(鐵筋)콘크리트보의 전단피로거동(剪斷疲勞擧動)에 관(關)한 연구(硏究)

This study is intended to investigate the shear fatigue behaviour of reinforced concrete beams based on a series of experiments, and verify the test results in comparison with the analysis result obtained by using a nonlinear finite element method. The experiments are divided into the tests under the static loading and the test under the dynamic fatigue loading. In order to investigate the shear failure behaviour under static loadings, four specimens for three different cases were made and tested. The behaviour of stirrups with the static stress and strain variations were observed based on the results of these tests. In the fatigue fracture tests, eleven specimens for four different cases were made and tested. Various observations on mid-span deflection of test beams and tensile strains of reinforcing steels as well as stirrups were made against various fatigue loadings. It may be concluded that the shear fatigue strengths of R.C. specimens at one million cycles turn out to be approximately 65 percent of the static ultimate shear strength.

철근콘크리트 보의 전단피로거동(剪斷疲勞擧動)에 관(關)해 실험적(實驗的)인 연구(硏究)를 실시하여, 수치해석(數値解析) 결과(結果)와 비교(比較) 검토하였다. 전단실험(剪斷實驗)은 정적실험(靜的實驗)과 피로파괴실험(疲勞破壞實驗)으로 구별하였는데, 정적실험(靜的實驗)에서는 3가지 경우의 시험부재(試驗部材) 4개를 제작하여 실험한 결과, 응력과 스터럽의 변형률 관계를 관찰하였고, 피로파괴실험(疲勞破壞實驗)에서는 4가지 경우의 시험부재(試驗部材) 11개를 제작하여 실험한 결과, 하중-중앙처짐 관계와 하중-인장철근 변형률 관계 그리고, 하중-스터럽의 변형률 관계를 관찰하였다. 100 만회(萬回)에 대한 부재(部材)의 피로강도(疲勞强度)는 정적극한강도(靜的極限强度)의 약 65%임을 확인할 수 있었다.