A Study on the Requirements for the Development of Side Mould for FCP(Free-form Concrete Panel) Manufacturing Equipment

FCP(Free-form Concrete Panel)생산 장비용 측면 거푸집 개발을 위한 요구사항 분석연구

  • 정경태 (국립 한밭대학교 건축공학과) ;
  • 윤지영 (국립 한밭대학교 건축공학과) ;
  • 윤종영 (국립 한밭대학교 건축공학과) ;
  • 이동훈 (국립 한밭대학교 건축공학과)
  • Published : 2020.11.12

Abstract

Free-form buildings usually have large curved shapes on the outside. In order to construct this curved shape, the exterior of the building must be divided into easy-to-manufacture shapes, and the segmented panel is called the FCP(Free-form Concrete Panel). These FCPs have different shapes and cannot reuse molds. To solve these problems, the researchers developed FCP manufacturing equipment to manufacture a mould of FCP. However, the developed equipment alone cannot completely manufacture FCP's mould. This is because there is no mould to implement side of FCP. Therefore, it is necessary to develop a side form of FCP that can be applied to FCP manufacturing equipment. To this end, this study analyzes the basic requirements that side mould should have before developing side mould.

Keywords

Acknowledgement

본 연구는 국토교통과학기술진흥원의 지원으로 수행되었음(과제번호 20CTAP-C151959-02).