Development of Lightweight Plastic Formwork through Efficiency(Load) Test

경량 플라스틱 거푸집 개발 및 성능(하중재하) 시험

  • 강신훈 (고려대학교 건축사회환경공학과) ;
  • 이창수 (고려대학교 건축사회환경공학과) ;
  • 권우빈 (고려대학교 건축사회환경공학과) ;
  • 안희재 (고려대학교 건축사회환경공학과) ;
  • 조훈희 (고려대학교 건축사회환경공학과) ;
  • 강경인 (고려대학교 건축사회환경공학과)
  • Published : 2020.06.12

Abstract

Currently, the most used forms, such as euro form and aluminum form, has many problems. There are issues with noise of construction site because of existing forms' material and issues with safety because of heavy weight. To solve these problems, there are many researches on using plastic and composite materials on the formwork. However, plastic has lower tensile strength than the steel and aluminum and composite materials are expensive. Therefore, constructors are avoid to use the forms with new materials. The purpose of this study is to develop light-weight plastic form to solve these existing problems by using ABS with optimized design. To verify, the study measured the amount of deflection from developed form through a load test. The test result showed a deflection of 1.15mm when 1.4ton was loaded in the middle of form. The result of the study verified that the usage of ABS and optimized design effectively reduced the weight and noise. Also, it's performance was verified through the load test.

Keywords