Design of Microstrip Patch Antenna on UHF Band using Multiple Meander for Metal Attached

금속 부착용 멀티 미앤더형 UHF 대역 마이크로스트립 패치 안테나 설계

  • Park, Chan-Hong (School of Computer, Information, and Communication Engineering, Sangji University) ;
  • Choi, Yong-Seok (School of Computer, Information, and Communication Engineering, Sangji University) ;
  • Koo, Dong-Jin (School of Computer, Information, and Communication Engineering, Sangji University) ;
  • Jang, Sung-Won (School of Computer, Information, and Communication Engineering, Sangji University) ;
  • Seong, Hyeon-Kyeong (School of Computer, Information, and Communication Engineering, Sangji University)
  • 박찬홍 (상지대학교 컴퓨터정보공학부) ;
  • 최용석 (상지대학교 컴퓨터정보공학부) ;
  • 구동진 (상지대학교 컴퓨터정보공학부) ;
  • 장성원 (상지대학교 컴퓨터정보공학부) ;
  • 성현경 (상지대학교 컴퓨터정보공학부)
  • Published : 2012.10.26

Abstract

In this paper, a novel particle swarm optimization method based on IE3D is used to design a mobile communication Microstrip Patch Antenna. The aim of the thesis is to Design and fabricate an inset fed rectangular Microstrip Antenna and study the effect of antenna dimensions Length (L), Width (W) and substrate parameters relative Dielectric constant (${\varepsilon}r$), substrate thickness on Radiation parameters of Band width. When the antenna was designed, a dual-band, dual-polarized antenna was used to secure the bandwidth and improve performance, and a coaxial probe feeding method so that the phased array of antenna is easy.

본 논문에서는 금속 환경에서 사용이 가능한 RFID 국제 규격인 910MHz 대역에서 최상의 성능을 갖는 미앤더 형태의 마이크로스트립 패치 안테나를 설계하였다. 안테나에 부착되는 상용 태그 칩과 정합을 위해 사각 형태의 급전부를 본체에 연결하였으며, 사각 형태의 급전부를 본체 안에 위치하였고, 안테나의 복수부인 본체를 효과적으로 축소하기 위하여 패치의 소자를 증가시켜 다중의 미앤더 형태로 설계하였다. 제안된 안테나의 크기와 접은 횟수에 따른 대역폭, 효율, 인식 거리 등의 특성을 비교 분석하였다. 측정결과 안테나의 크기와 미앤더 형태로 접은 횟수에 따른 효율 및 이득 특성 변화가 안테나의 인식 거리에 큰 영향을 미치는 것을 확인하였다.

Keywords