The Analysis of missmatch with resistance on Si-PV module
결정질 태양전지 모듈 내부 저항의 Missmatch 분석
- Ji, Yang-Geun (Dept. of Electrical Engineering, Konkuk University) ;
- Kong, Ji-Hyun (Dept. of Electrical Engineeringk, Konkuk University) ;
-
Kong, Gi-Hwan
(Photovoltaic Research Group, Korea Institute of Energy Research)
;
-
Yu, Gwon-Jong
(Photovoltaic Research Group, Korea Institute of Energy Research)
;
- Won, Chang-Sub (Dept. of Electrical Engineering, Konkuk University) ;
-
Ahn, Hyung-Geun
(Dept. of Electrical Engineering, Konkuk University)
;
-
Han, Deuk-Young
(Dept. of Electrical Engineeringk, Konkuk University)
- 지양근 (건국대학교 대학원 전기공학과) ;
- 공지현 (건국대학교 대학원 전기공학과) ;
-
강기환
(한국에너지기술연구원 태양광연구단)
;
-
유권종
(한국에너지기술연구원 태양광연구단)
;
- 원창섭 (건국대학교 대학원 전기공학과) ;
-
안형근
(건국대학교 대학원 전기공학과)
;
-
한득영
(건국대학교 대학원 전기공학과)
- Published : 2009.11.19
Abstract
In this paper, we test the electrical resistance of flat wire in the PV module. normally solar cell has two kind of flat wire(inter connection ribbon and bus bar ribbon). we found the phenomenon that has a unbalance with resistance when we make a wiling between of string. So, we measurement the resistance of flat wire each other. and analysis of missmatch with resistance between flat wires on PV module. next to survey of IR picture on missmatch flat wire samples for analyze of missmatch with current in the wire. and we perform IR test with solar cell that has a connection with flat wire for test the effect of missmatch resistance on solar cell. Finally we perform the Dark I-V test for survey of effect by the unbalance of resistance. By the result of Dark I-V test, the series resistance of existing connection sample is large more then innovated connection sample.