소형가스터빈 디스크의 얼간단조

The Hot Forging of Small Size Gas Turbine Disks

  • 차도진 (두산중공업,기술연구원 소재개발센터) ;
  • 송영석 (두산중공업,기술연구원 소재개발센터) ;
  • 김영득 (두산중공업,기술연구원 소재개발센터) ;
  • 김동권 (두산중공업,기술연구원 소재개발센터)
  • 발행 : 2008.10.09

초록

Small size gas turbine disk requires good mechanical strength and creep properties at high temperature. In this study, Waspaloy was used as a superalloy to satisfy these specifications. The control of microstructure was needed to satisfy material properties at high temperature. In order to do this, we studied forging conditions and material analysis. Therefore die and preform design conducted so that hot forged gas turbine disk could have a good microstructure. The die and preform shapes are designed with consideration of the predefined hydraulic press capacity and the microstructure of forging product. Also we carried out the hot compression test for Waspaloy in various test conditions. From these results, we obtained the forging conditions as material temperature, die velocity etc. To verify these forging conditions, we conducted FE simulations by means of the DEFORM 2D-HT. In this study, the hot closed die and preform designs were completed to offer high temperature material properties of a small size gas turbine.

키워드