Analysis of Damage Levels with Bond Performance between Reinforcement and Recycled Coarse Aggregate Concrete

순환굵은골재 콘크리트와 이형철근의 부착거동시 손상단계 분석

  • Published : 2008.11.07

Abstract

One of the most important requirements for reinforced concrete constructions is the bond behavior between concrete and reinforcement. In this study, the positions (i.e., vertical, horizontal) and the locations (i.e., 225mm and 75mm) of reinforcement were considered as a main test parameter. The ready mixed recycled aggregate concrete concrete with specified strength of 21MPa was prepared with different replacement ratio(i.e 0%, 100%) of recycled coarse aggregate. From the test results, it was bond that under the same mix proportion (i.e., the mix proportions are the same, except for deformed bars position), the bond strength between the recycled coarse aggregate concrete and the reinforcement has obvious relation with reinforcement position. Also, the specimens of top position showed a lower bond stress than that provided in CEB-FIP Code.

본 연구에서는 철근의 배근방향(수직, 수평) 및 위치(상부근, 하부근)를 주요 변수로 하여 이형철근과 순환굵은골재와의 부착거동을 단계별로 평가하기 위한 실험을 실시하였다. 본 연구를 통하여 얻어진 실험결과를 종합해 보면, 수평 시험체의 상부철근 시험체의 경우 하부철근 시험체 보다 부착 강도가 저하되는 것으로 나타났으며, 이는 굵은골재의 편중현상 및 상부철근 하부에서 부유물(Laitance) 발생에 따른 것으로 판단된다. 또한, 수직 시험체 및 수평철근 시험체의 부착에너지를 비교한 결과 수평 상부철근 시험체의 경우 수직 및 수평 하부철근 시험체에 비하여 부착에너지가 감소한 것으로 나타났다.

Keywords