Drying Shrinkage of Ultra High Strength Steel-Fiber Reinforced Cementitious Composites

초고강도 강섬유 보강 시멘트 복합체의 건조수축에 관한 연구

  • 강수태 (한국건설기술연구원 구조재료연구실) ;
  • 조창빈 (한국건설기술연구원 구조시스템연구실) ;
  • 박종섭 (한국건설기술연구원 구조시스템연구실) ;
  • 류금성 (한국건설기술연구원 구조재료연구실) ;
  • 김성욱 (한국건설기술연구원 구조재료연구실) ;
  • 김병석 (한국건설기술연구원 구조시스템연구실)
  • Published : 2008.11.07

Abstract

When UHSFRC is applied to structures, it can be expected that it shows excellent performance in a point of constructability and load capacity. However, its rich mix can cause some problems concerning the long-term behavior such as shrinkage and creep. Therefore it is inevitably needed to investigate its long-term behavior in order to apply it to structures safely. This study is dealing with the drying shrinkage of UHSFRC. UHSFRC shows relatively fast drying shrinkage in the early exposed ages and slow moisture diffusion caused by compact microstructure of the material. It was found that The KCI model to predict the drying shrinkage did not properly represent these properties of UHSFRC. therefore a modified drying shrinkage model applicable to UHSFRC, which has different shrinkage properties from that of normal concrete, was proposed

UHSFRC(Ultra High Strength Steel-Fiber Reinforced Cementitious Composites)를 구조부재에 적용할 경우, 시공성능 및 내하성능에 있어서 탁월한 효과가 있을 것으로 예상된다. 하지만 부배합의 특성 상 수축 및 크리프와 같은 장기거동 특성에 대해서는 구조부재 적용에 있어 장해요인으로 인식되고한다. 따라서 UHSFRC를 구조부재에 적용할 경우 건조수축 및 크리프 변형 등 장기거동에 대한 검토가 반드시 필요할 것이다. 본 연구에서는 UHSFRC의 건조수축 특성에 대한 분석결과를 나타내었다. 초기 노출재령에서 상대적으로 빠르게 발생하는 UHSFRC의 건조수축 특성과 재료의 치밀한 조직 구성으로 인해 수분의 이동이 훨씬 느리게 발생하는 점 등으로 인해 국내 설계기준에서 제시하고 있는 건조수축모델을 UHSFRC에 적용할 경우, 수축거동 특성을 정확하게 반영하지 못하는 것으로 나타났으며, 따라서 일반 콘크리트와는 다른 UHSFRC의 수축특성을 반영한 건조수축 모델을 제안하였다.

Keywords