The development of biodegradable resin for scaffold fabrication using micro-stereolithography and curing characteristics analysis of the resin

마이크로 광 조형기술을 이용한 인공지지체의 제작을 위한 생분해성 수지의 개발 및 경화 특성 파악

  • Lee J.W. (Mechanical. Eng. Dept. POSTECH) ;
  • Cho D.W. (Mechanical Eng. Dept., POSTECH)
  • 이진우 (포항공대 대학원 기계공학과) ;
  • 조동우 (포항공대 기계공학과)
  • Published : 2006.05.01

Abstract

A research on scaffold fabrication has been progressed in many research groups. However, the mechanical properties of existing biodegradable materials are still not satisfactory. But, PPF (poly (propylene fumarate)) has a good mechanical property in comparison to other biodegradable materials. Nevertheless, the viscosity of the synthesized PPF is too high to fabricate structures using micro-stereolithography. Therefore, the viscosity of the resin was made low by adding the diethyl fumarate and this material could be used in micro-stereolithography apparatus. Then, a photoinitiator was added for photo crosslinking of the DEF/PPF resin. 2.5D and 3D scaffolds were fabricated our system and curing characteristics of the resin were analyzed through the experiment.

Keywords