한국분말야금학회:학술대회논문집 (Proceedings of the Korean Powder Metallurgy Institute Conference)
- 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
- /
- Pages.763-764
- /
- 2006
Powder Injection Moulding of Mn-Zn Ferrite
- Rodriguez-Senina, E. (Materials Science and Engineering Department. Universidad Carlos III de Madrid.) ;
- Varez, A. (Materials Science and Engineering Department. Universidad Carlos III de Madrid.) ;
- Levenfeld, B. (Materials Science and Engineering Department. Universidad Carlos III de Madrid.)
- 발행 : 2006.09.24
초록
Ceramic Injection Moulding (CIM) technology has been successfully used for the fabrication of Mn-Zn Ferrite part. The binder was composed by polypropylene and paraffin wax. The optimal powder loading (58% vol.) was determined by means of rheological measurements. Threedifferent parts, toroids, bending and tensile probes were injected. Thermal and solvent-thermal debinding was designed based on DSC and TGA studies of the binder. The time of the debinding cycle was reduced using n-heptane to dissolve previously the paraffin wax. Final properties have been determined and compared with uniaxial pressure parts values. The densities obtained were slightly higher than those of uniaxial pressure parts and the magnetic properties presented similar values.