Proceedings of the Korean Powder Metallurgy Institute Conference (한국분말야금학회:학술대회논문집)
- 2006.09b
- /
- Pages.761-762
- /
- 2006
Development of the High Performance W-Cu Components by Powder Injection Molding
- Chung, Seong-Taek (CetaTech, Inc.) ;
- Kwon, Young-Sam (CetaTech, Inc.) ;
- Lee, Seong (ADD, Yuseong) ;
- Noh, Joon-Woong (ADD, Yuseong)
- Published : 2006.09.24
Abstract
W-Cu alloy was very useful material for a heat sink, high electric contact and EDM electrode. Powder injection molding (PIM) is the optimum manufacturing technology to provide W-Cu components with low-cost and high-volume. We used various compositions of tungsten coated copper powders (W-Cu with 10 to 80 wt-% of copper) to manufacture W-Cu components by PIM. The optimum mixing, injection molding, debinding and sintering conditions to provide the high performance W-Cu components were investigated. The thermal and mechanical properties of W-Cu parts by PIM were measured. Finally, we can verify the high performance of W-Cu components by PIM with the tungsten coated copper.