Proceedings of the IEEK Conference (대한전자공학회:학술대회논문집)
- 2005.11a
- /
- Pages.913-916
- /
- 2005
Fabrication of a Micro Multilayer Piezo Actuator Valve and Its Characteristics
마이크로 적층형 압전밸브의 제작과 그 특성
-
Chung, Gwiy-Sang
(School of Electrical Eng., Univ. of Ulsan) ;
- Kimm, Jae-Min (School of Electrical Eng., Univ. of Ulsan) ;
-
Cho, Sang-Bock
(School of Electrical Eng., Univ. of Ulsan)
- Published : 2005.11.26
Abstract
This paper describes the design, fabrication and characteristics of a piezoelectric valve using MCA(Multilayer ceramic actuator). The MCA valve, which has the buckling effect, consists of three separate structures; MCA, a valve actuator die and an a seat die. The design of the actuator die was done by FEM modeling and displacement measurement, respectively. The valve seat die with 6 trenches was made, and the actuator die, which is driven to MCA under optimized conditions, was also fabricated. After Si-wafer direct bonding between the seat die and the actuator die, MCA was also anodic bonded to the seat/actuator die structure. PDMS sealing pad was fabricated to minimize a leak-rate. It was also bonded to seat die and SUS package. The MCA valve shows a flow rate of 9.13 sccm at a supplied voltage of 100 V with a 50 % duty cycle, maximum non-linearity was 2.24 % FS and leak rate was
Keywords