A Study on Selecting Conditions of Rapid Prototype for Controls of Shape of Micro-hole

미세홀 형상제어를 위한 쾌속조형의 조건선정에 관한 연구

  • 김태호 (동아대학교 기계공학과 대학원) ;
  • 박재덕 (동아대학교 기계공학과 대학원) ;
  • 이승수 (동아대학교 기계공학과) ;
  • 서상하 (부산기능대학 컴퓨터응용기계설계과) ;
  • 전언찬 (동아대학교 기계공학부)
  • Published : 2005.06.01

Abstract

Rapid Prototype has been used to design and Production of part in a variety of fields ; Car, Electronic products, Aviation, Heavy industry etc. Moreover development of hardware gave rise to use the method of Rapid Prototype more and more at high precision and complicated shapes. Expecially, to be using process of products that shapes of Micro-hole ; Cellular phones, Antennas, Jewels, Semi conductor cases. In case of Micro-shape, precision of the shape turns on various condition ; Laser size, Laminate height, scanning speed, overcure, viscosity of resin, etc. Sometimes breaks out the case that interner hole of shape is blocked by viscosity of resin. The phenomenon has solved easily to reduce viscosity of resin. But, in case of the method brings about the problem that strength goes down in actuality products hardening. This study on verify to change of shape of Micro-hole and makes the semiconductor case which has shape of Micro-hole by using resin of higher viscosity, scanning speed and overcure

Keywords