Proceedings of the Korean Society of Precision Engineering Conference (한국정밀공학회:학술대회논문집)
- 2005.06a
- /
- Pages.680-685
- /
- 2005
- /
- 2005-8446(pISSN)
Study on the Electrospun Nanofiber Fabrication and Alignment of the Functionalized CNT Reinforced Polymer
전기방사 방법을 사용한 기능화된 탄소나노튜브 강화 고분자 수지 나노섬유 제조에 관한 연구
- Yoon Yu-Hwan (Mech. Eng. Dept, Sejong Univ.) ;
-
Park Joo-Hyuk
(Mech. Eng. Dept, Sejong Univ.)
- Published : 2005.06.01
Abstract
Multi-walled carbon nanotubes were purified by using the nitric acid after the mechanical cutting, which carboxylic group might be introduced into the surface of nanotubes. To enhance the dispersion of CNTs, carboxylic groups were substituted in the reaction with octadecyl amine containing a long alkyl group. Nanofibers were manufactured by electrospinning, the solution that mixed with PMMA and ODA-fuctionalized CNTs in dimethyl formamide and dispersed with ultrasonication. Diameter and alignment of nanofibers with various electrospinning parameters, such as the CNT and PMMA concentration in solution, the applied voltage, and the distance to the collector were investigated. As a result, the nanofiber diameter was increased with the increment of PMMA concentration, whereas it was reduced as the applied voltage and the spinning distance was increased. The spinning area became smaller with the distance. The nanofibers were formed without the defect on surface and well aligned in a specific concentration of PMMA and nanotubes.