Proceedings of the KIEE Conference (대한전기학회:학술대회논문집)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Fabrication and test of 100 hp High Tc Superconducting Motor

100마력 고온초전도 모터 제작과 평가(I)

  • Sohn M.H. (Korea Electrotechnology Research Institute) ;
  • Baik S.K. (Korea Electrotechnology Research Institute) ;
  • Lee E.Y. (Korea Electrotechnology Research Institute) ;
  • Kwon Y.K. (Korea Electrotechnology Research Institute) ;
  • Kwon W.S. (Korea Electrotechnology Research Institute) ;
  • Moon T.S. (Doosan Heavy Industries & Construction Co.) ;
  • Park H.J. (Doosan Heavy Industries & Construction Co.) ;
  • Kim Y.C. (Doosan Heavy Industries & Construction Co.) ;
  • Cho C.H. (Doosan Heavy Industries & Construction Co.)
  • 손명환 (한국전기연구원 초전도응용연구그룹) ;
  • 백승규 (한국전기연구원 초전도응용연구그룹) ;
  • 이언용 (한국전기연구원 초전도응용연구그룹) ;
  • 권영길 (한국전기연구원 초전도응용연구그룹) ;
  • 권운식 (한국전기연구원 초전도응용연구그룹) ;
  • 문태선 (두산중공업(주) 기술연구원) ;
  • 박희주 (두산중공업(주) 기술연구원) ;
  • 김영춘 (두산중공업(주) 기술연구원) ;
  • 조창호 (두산중공업(주) 기술연구원)
  • Published : 2004.07.14
Download PDF
⟨ Previous Next ⟩

Abstract

For the first time in Korea, a 100hp high Tc superconducting(HTS) motor has been designed, developed and successfully tested recently. The design was based on 2-dimensional electromagnetic field analysis of cylindrical coordinate. The field winding of rotor was wound with Bi-2223 tapes and tested after assembled with other rotor components. The stator had air-gap type armature windings which allow higher terminal voltage and more sinusoidal voltage waveform than conventional iron cored machines. Steady state open & short-circuit test and resistive load test were conducted also in generator mode. The fabrication and test results of this machine were discussed in this paper.

Keywords