Proceedings of the Korean Society of Machine Tool Engineers Conference (한국공작기계학회:학술대회논문집)
- 2004.10a
- /
- Pages.292-297
- /
- 2004
A Case Study on Diagnosis and Checking for Machine-Tools with an OAC
개방형 컨트롤러를 갖는 공작기계에 적합한 진단 및 신호점검사례
Abstract
The conventional computerized numerical controller (CNC) of machine tools has been increasingly replaced by a PC-based open architecture CNC (OAC) which is independent of the CNC vendor. The OAC and machine tools with OAC led the convenient environment where it is possible to implement user-defined application programs efficiently within CNC. Tis paper proposes a method of operational fault cause diagnosis which is based on the status of programmable logic controller (PLC) in machine tools with OAC. The operational fault is defined as a disability state occurring during normal operation of machine tools. The faults are occupied by over 70% of all faults and are also unpredictable as most of them occur without any warning. Two diagnosis models, the switching function (SF) and the step switching function (SSF), are propose in order to diagnose the fault cause quickly and exactly. The cause of an occurring fault is logically diagnosed through a fault diagnosis system (FDS) using the diagnosis models. A suitable interface environment between CNC and develope application modules is constructed in order to implement the diagnostic functions in the CNC domain. The diagnosed results were displayed on a CNC monitor for machine operators and provided to a remote site through a web browser. The result of his research could be a model of the fault cause diagnosis and the remote monitoring for machine tools with OAC.
Keywords
- CNC(Computerized Numerical Controller);
- OAC(Open Architecture Controller);
- Remote Monitoring;
- Fault Diagnos