한국항해항만학회:학술대회논문집 (Proceedings of the Korean Institute of Navigation and Port Research Conference)
- 한국항해항만학회 2004년도 춘계학술대회 논문집
- /
- Pages.5-9
- /
- 2004
광섬유를 이용한 광영상 단층촬영기에 관한연구
A study on optical coherence tomography system using optical fiber
초록
본 연구에서 고분해능 측정과 저가격화 및 소형으로 제작이 가능하여 전세계적으로 많은 연구가 진행중인 광섬유를 이용한 광영상단층촬영기를 연구하였다. 광영상단층촬영기의 기돈원리로는 마이켈슨 간섭계를 이용한 것이다. 시스템의 구성으로는 광원은 분해능 및 측정범위를 고려하여 1,300nm 중심파장을 가지며 대역폭이 35nm인 상용제품의 SLD(Superluminersent diode)를 사용하였으며, 샘플내부의 영상을 검출하기 위한 간섭신호 검출방법은 기준거울이 선형적으로 이동하여 광경로를 일치하는 광지연선로를 구성하였다. 그리고 간섭계는 단일모드 광섬유를 이용하여 기본적인 마이켈슨 간섭계를 구성하였으며, 스캐너는 시준기를 이용하여 샘플에 대한 초점을 고정하도록 하였으며, 스템모터를 이용하여 스텝모터를 이용하여 샘플에 대한 횡단방향으로 이동하여 샘플의 2차원 단층영상을 측정하도록 하였다. 수광부는 소신호인 간섭신호를 검출하기 위하여 감도가 뛰어나면 잡음특성이 우수한 800~1,700nm 측정범위의 광검출기를 사용하였다. 신호처리부에서 간섭신호의 포락선 신호만을 검출하기 위하여 증폭 및 필터링 하여 A/D 변환을 거친 후 제작된 영상검출 프로그램을 이용하여 단층영상을 나타내도록 하였다. 측정결과 분해능은 약 30
In this paper, we studied the OCT(Optical Coherence Tomography) system which it has been extensively studied because of having some advantages such as high resolution cross-sectional images, low cost, and small size configuration. A basic principle of OCT system is Michelson interferometer. The characteristics of light source determine the resolution and the transmission depth. As a results, the light source have a commercial SLD with a central wavelength of 1,285 nm and FWHM(Full Width at Half Maximum) of 35.3 nm. The optical delay line part is necessary to equal of the optical path length with scattered light or reflected light from sample. In order to equal the optical path length, the stage which is attached to reference mirror is moved linearly by step motor And the interferometer is configured with the Michelson interferometer using single mod fiber, the scanner can be focused of the sample by using the reference arm. Also, the 2-dimensional cross-sectional images were measured with scanning the transverse direction of the sample by using step motor. After detecting the internal signal of lateral direction at a paint of sample, scanner is moved to obtain the cross-sectional image of 2-demensional by using step motor. Photodiode has been used which has high detection sensitivity, excellent noise characteristic, and dynamic range from 800 nm to 1,700 nm. It is detected mixed small signal between noise and interference signal with high frequency After filtering and amplifying this signal, only envelope curve of interference signal is detected. And then, cross-sectional image is shown through converting this signal into digitalized signal using A/D converter. The resolution of the OCT system is about 30
키워드