Characteristics of Bond Strength with Measuring Methods of Concrete

시험방법에 따른 신ㆍ구 콘크리트의 부착강도 특성

  • 장흥균 (㈜국일건설엔지니어링) ;
  • 김성환 (강원대학교 토목공학과) ;
  • 홍창우 (충주대학교 건설도시공학과) ;
  • 윤경구 (강원대학교 토목공학과)
  • Published : 2003.05.01

Abstract

The development and maintenance of a sound bond are an essential requirements of concrete repair and replacement. The bond property of a bonded overlay to its substrate concrete during the lifetime is one of the most important performance requirements which should be quantified. A standard or a verified bond strength measurement method is required at field for screening, selecting materials and quality control for overlay or repair materials. This study compares the nipple pipe direct tensile test, flexural adhesion test, and core pull-off test with their test results. Substantial differences in the failure stresses of three test methods were attributed to their different geometries and loading conditions. From these comparison and investigation, core pull-off test was relatively good because the coefficient of variation values were about 2%. It would be suitable for use in-situ because of its simplicity and accuracy.

Keywords