Proceedings of the Korean Society of Precision Engineering Conference (한국정밀공학회:학술대회논문집)
- 2002.10a
- /
- Pages.845-848
- /
- 2002
- /
- 2005-8446(pISSN)
A Study on the Behavior of Wrinkles in Cup Drawing with AL alloy
AL합금의 용기 성형시 주름의 거동에 관한 연구
Abstract
The wrinkling in the flange and wall of a part is a predominent failure mode in stamping of sheet metal parts. In many cases this wrinkling may be eliminated by appropriate control of the blank holding forco(BHF), but BHF affects the draw depth. Gotoh had studied the wrinkles under 0.02mm in height. In general, the height of wrinkles could be limited under 0.2mm practically. Therefore small BHP can be allowed so that the depth of drawing could be increased. Authors research the variation of the wrinkles in flange in the course of cup drawing by using aluminium alloy Al050 and A5052.
Keywords