RP를 이용한 용접비드 형상예측 시스템 개발에 관한 연구

A study on development of the system for prediction of bead geometry using Rapid Prototyping

  • 손준식 (목포대학교 대학원 기계공학과) ;
  • 김일수 (목포대학교 기계선박해양공학부) ;
  • ;
  • 박창언 (목포대학교 기계선박해양공학부) ;
  • 성백섭 (목포대학교 기계선박해양공학부) ;
  • 이진구 (목포대학교 대학원 기계공학과) ;
  • 정호성 (목포대학교 대학원 기계공학과)
  • ;
  • ;
  • Prasad K.D.V. Yarlagadda (School of Mechanical, Manufacturing and Medical Engineering Queensland University of Technology) ;
  • ;
  • ;
  • ;
  • 발행 : 2002.04.01

초록

Generally, the use of robots in manufacturing industry has been increased during the past decade. GMA(Gas Metal Are) welding is an actively growing area and many new procedures have been developed for use with high strength alloys. One of the basic requirement for welding applications is to study relationships between process parameters and bead geometry. The objective of this paper is to develop a new approach involving the use of neural network and multiple regression methods in the prediction of bead geometry for GMA welding process and to develop an intelligent system that enables the prediction of bead geometry using Rapid Prototyping(RP) in order to employ the robotic GMA welding processes. This system developed using MATLAB/SIMULINK, could be effectively implemented not only for estimating bead geometry, but also employed to monitor and control the bead geometry in real time.

키워드