A Study on the Drawability of Clad Sheet Metal (STS304-A1050-STS304) by Warm Draw Die

온간금형에 의한 클래드판재(STS304-A1050-STS304)의 드로잉성 연구

  • 류호연 (서울산업대학교 금형설계학과) ;
  • 김종호 (서울산업대학교 금형설계학과) ;
  • 류제구 (서울산업대학교 금형설계학과)
  • Published : 2002.02.01

Abstract

Warm draw die technique which is one of the new forming technologies to improve formability of sheet metal is applied to the cylindrical and square cup drawing of stainless-aluminum clad sheets. In experiments the temperature of die and blank holder is varied from room temperature to $180^{\circ}C$, while the punch is cooled by circulation of coolant to increase the fracture strength of workpiece on the punch comer area. Test materials chosen for experiments are STS304-A1050-STS304 clad sheets. Teflon film as a lubricant is used on both sides of a workpiece. The limit drawing ratio and relative drawing depth as well as quality of drawn cups(distribution of thickness)are investigated and validity of warm drawing process is also discussed. No separation between each laminated material after drawing occurred through inspection by microscope as well as application of penetrant remover and bond strength test. Therefore, warm forming technique was confirmed to give better results in deep drawing of stainless clad sheet metal.

Keywords