4 극 발전기 로터의 고정 링 열박음 해석

Analysis of Shrink-Fitted Retaining Ring on Rotor Body in 4-Pole Generator

  • 이후광 (두산중공업(주) 기술연구원) ;
  • 황석환 (두산중공업(주) 기술연구원) ;
  • 최재승 (두산중공업(주) 기술연구원)
  • 발행 : 2001.06.27

초록

A study about the shrink fits of rotor and retaining ring in generator was performed for the cases of three radial interference. The shrink-fitted retaining ring used to restrain the end turns of the winded coils in the rotor against centrifugal force requires very careful attention during design and manufacture because it has traditionally been the highest-stressed component of the generator. The contact pressures and residual stresses were obtained by the finite element analysis for each radial interference at zero, 100% rated, and 120% rated speeds, respectively. The results of analysis show that the radial interference in use needs to be increased carefully.

키워드