Structural and Electrical Properties of $CuGaS_2$ Thin Films

$CuGaS_2$ 반도체 박막의 구조적 및 전기적 특성

  • 박계춘 (목포대학교 전기공학과) ;
  • 정해덕 (목포대학교 전기공학과) ;
  • 이진 (목포대학교 전기공학과) ;
  • 정운조 (한려대학교 정보통신과) ;
  • 김종욱 (전북대학교 전자정보사업단) ;
  • 조영대 (전남대학교 전기공학과) ;
  • 구할본 (전남대학교 전기공학과)
  • Published : 2001.07.01

Abstract

Single phase CuGaS$_2$ thin film with the highest diffraction peak of (112) at diffraction angle (2$\theta$) of 28.8$^{\circ}$ was made at substrate temperature of 7$0^{\circ}C$, annealing temperature of 35$0^{\circ}C$ and annealing time of 60 min. And second highest (204) peak was shown at diffraction angle (2$\theta$) of 49.1$^{\circ}$. Lattice constant of a and c of that CuGaS$_2$ thin film was 5.37 $\AA$ and 10.54 $\AA$ respectively. The greatest grain size of the thin film was about 1${\mu}{\textrm}{m}$. The (112) peak of single phase of CuGaS$_2$ thin film at annealing temperature of 35$0^{\circ}C$ with excess S supply was appeared with a little higher about 10 % than that of no exces S supply And the resistivity, mobility and hole density at room temperature of p-type CuGaS$_2$ thin film with best crystalline was 1.4 $\Omega$cm, 15 cm2/V . sec and 2.9$\times$10$^{17}$ cm$^{-3}$ respectively. It was known that carrier concentration had considerable effect than mobility on variety of resistivity of the fabricated CuGaS$_2$ thin film, and the polycrystalline CuGaS$_2$ thin films were made at these conditions were all p-type.

Keywords