Proceedings of the Korean Society of Precision Engineering Conference (한국정밀공학회:학술대회논문집)
- 2001.04a
- /
- Pages.45-48
- /
- 2001
- /
- 2005-8446(pISSN)
A Study on Improving the Surface Roughness of Stereolithography Parts -Using Paraffin Coating and Grinding Postprocess-
광조형물의 표면 조도 향상에 관한 연구 -파라핀 코팅과 연삭 후처리 공정 이용-
Abstract
SL(Stereolithogrphy) part is made by piling up thin layers which causes the stair stepping effect at the surface of SL parts. This effect causes excessive surface roughness and requires additional postprocess finishing such as abrasive basting which is detrimental to part geometry and time consuming. Hence paraffin coating and grinding postprocess is proposed to raise the surface quality of SL part. The paraffin which has suitable properties for the proposed postprocess is coated all over the part surface. By grinding the thin layer of coated on the SL part only, the surface roughness can be improved without any damage on the part. From the experimental result, It is verified as very practical for die casting with silicon rubber mold.
Keywords