전력전자학회:학술대회논문집 (Proceedings of the KIPE Conference)
- 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
- /
- Pages.174-178
- /
- 2001
An Improved Stationary Frame-based Digital Current Control Scheme for a PM Synchronous Motor
-
Kim Kyeong-Hwa
(Department of Electrical Engineering Korea Advanced Institute of Science and Technology) ;
- Youn Myung-Joong (Department of Electrical Engineering Korea Advanced Institute of Science and Technology)
- 발행 : 2001.10.01
초록
An improved stationary frame-based digital current control technique for a permanent magnet (PM) synchronous motor is presented. Generally, the stationary frame current controller is known to provide the advantage of a simple implementation. However, there are some unavoidable limitations such as a steady-state error and a phase delay in the steady-state. On the other hand, in the synchronous frame current regulator, the regulated currents are dc quantities and a zero steady-state error can be obtained through the integral control. However, the need to transform the signals between the stationary and synchronous frames makes the implementation of a synchronous frame regulator complex. Although the PI controller in the stationary frame gives a steady-state error and a phase delay, the control performance can be greatly improved by employing the exact decoupling control inputs for the back EMF, resulting in an ideal steady-state control characteristics irrespective of an operating condition as in the synchronous PI decoupling controller. However, its steady-state response may be degraded due to the inexact cancellation inputs under the parameter variations. To improve the control performance in the stationary frame, the disturbance is estimated using the time delay control. The proposed scheme is implemented on a PM synchronous motor using DSP TMS320C31 and the effectiveness is verified through the comparative simulations and experiments.
키워드