한국정보디스플레이학회:학술대회논문집
- 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
- /
- Pages.219-220
- /
- 2000
Formation of an Aluminum Parting Layer in the Fabrication of Field Emitter Arrays Using Reflow Method
-
Kang, Seung-Youl
(Micro-Electronics Lab., Electronics and Telecommunications Research Institute) ;
- Jung, Moon-Youn (Micro-Electronics Lab., Electronics and Telecommunications Research Institute) ;
- Cho, Young-Rae (Micro-Electronics Lab., Electronics and Telecommunications Research Institute) ;
-
Song, Yoon-Ho
(Micro-Electronics Lab., Electronics and Telecommunications Research Institute) ;
- Lee, Sang-Kyun (Micro-Electronics Lab., Electronics and Telecommunications Research Institute) ;
- Kim, Do-Hyung (Micro-Electronics Lab., Electronics and Telecommunications Research Institute) ;
-
Lee, Jin-Ho
(Micro-Electronics Lab., Electronics and Telecommunications Research Institute) ;
-
Cho, Kyoung-Ik
(Micro-Electronics Lab., Electronics and Telecommunications Research Institute)
- 발행 : 2000.01.13
초록
We propose a new method for the formation of an aluminum parting layer in the fabrication of field emitter arrays, in which we used a reflow property of aluminum at a lower temperature than the deformation point of glass. After the sputtered aluminum layer on the gate metal was etched for the formation of gate holes, we carried out a rapid thermal annealing process, by which the aluminum slightly diffused into the gate hole. This reflowed aluminum could be used as a parting layer and emitter arrays were easily fabricated using this method.
키워드