K-band MMIC Oscillator Design Using the PHEMT

PHEMT소자를 이용한 K-band MMIC 발진 설계

  • 이지형 (동국대학교 밀리미터파 신기술 연구센터) ;
  • 채연식 (동국대학교 밀리미터파 신기술 연구센터) ;
  • 조희철 (동국대학교 밀리미터파 신기술 연구센터) ;
  • 윤용순 (동국대학교 밀리미터파 신기술 연구센터) ;
  • 이진구 (동국대학교 밀리미터파 신기술 연구센터)
  • Published : 2000.06.01

Abstract

An MMIC oscillator operating at the 24.55 GHz has been designed using 0.2 ${\mu}{\textrm}{m}$AlGaAs/InGaAs/GaAs Pseudomorphic HEMT technology. The active device used in the oscillator design has a 0.2 ${\mu}{\textrm}{m}$ gate length PHEMT with 4$\times$80 ${\mu}{\textrm}{m}$ gate width. We obtained 4.08 dB of S$_{21}$ gain and 317 mS/mm of transconductance, and extrapolated unit current gain cut-off frequency (f$_{T}$) and maximum oscillation frequency (fmax) were 62 GHz and 120 GHz, respectively. The circuit are based on a series feedback and negative resistance topology. Microstrip line open stub is used to terminating. The oscillator circuits has designed for delivering maximum power to load and conjugated matching. The simulated small signal negative resistance was 50 Ω. We obtained 1.002 of loop gain and 0.0005$^{\circ}$angle from the simulation by HP libra 6.1. The layout for oscillator is 1.2$\times$1.8 $\textrm{mm}^2$.>.

Keywords