철근의 부식정도와 부착강도에 대한 연구

A Study on the Relationship between Degree of Rust Condition and Bond Strength in Reinforced Concrete Members

  • 유환구 (한국도로공사 도로연구소 재료연구실 연구원) ;
  • 이병덕 (한국도로공사 도로연구소 재료연구실 연구원) ;
  • 김국한 (한국도로공사 도로연구소 재료연구실 책임연구원) ;
  • 안태송 (한국도로공사 도로연구소 재료연구실 책임연구원)
  • 발행 : 1998.04.01

초록

An experimental investigation on the reinforcing bar corrosion and relationshid of reinforcing bar and concrete bond strength has been conducted to establish the allowable limit of rust in the construction field. The reinforcing bars used in this study were rusted before embedding in concrete. The first component of this experiment is to make rust of reinforcing bar rust artificially based on Faraday's theory at certain rates such as 2, 4, 6, 8 and 10% of reinforcing bar weight. For estimation of the amount of rust by weight, Clarke's solution and Shot blasting were adopted and compared. Parameters include 240 and 450kg/㎠ of compressive strengths and diameter of reinforcing bar (16, 19 and 25mm) corresponding development length for pull-ort test. And, pull-out tests were carried. out according to KSF 2441 and ASTMC 234 to investigate the effect of the corrosion rate on reinforcing bar-concrete bond behavior. It is found from the test results that the test techniques for corrosion of bar used in this study is relatively effective and correct test method. Results shows that up to 2% of rust increases the bond strength regardless of concrete strength and diameter of reinforcing bar like the existing data. It might be because of the roughness from rust. As expected, the bond strength increases as compressive strength of concrete increases and the diameter of bar decreases.

키워드