A Study on the Development of Chonggu Splice-Sleeve System

청구 스플라이스 슬리브 시스템 개발에 관한 연구

  • 곽철승 ((주) 청구 기술연구소 연구원) ;
  • 이용재 (한양대학교 건축공학과) ;
  • 이동우 ((주) 청구 기술연구소 팀장) ;
  • 김병균 ((주) 청구 기술연구소) ;
  • 이리형 (한양대학교 건축공학과)
  • Published : 1996.10.01

Abstract

The purpose of this paper, having chosen the connection method, filled by High-strength mortar, in conncetion of PC member, is to study the mechanical behaviour and practical usage of the method. The paper estimates the connection ability of Reinforced-bar, that is, Sleeve considering the effect of Reinforced-bar's dimeter. Sleeve's length and diameter in the structural behaviour of mortar-filled connection, therefore the behaviour of Splice-Sleeve exists in concrete practically. This paper discusses the effect of the concrete in Splice-Sleeve. Also, to estimate structural behaviour in a practical wall panel, the upper and bottom wall panels are produced and the behaviour of Splice-Sleeve is discussed. And then Vertical Tie Bar being designed by using Precast method, this paper presents the various application and the practicable method using Splice-Sleeve.

Keywords