알루미나의 고온 굽힘 크리프 및 크리프 파괴

Bending Creep and Creep Facture of Alumina under High-Temperature

  • 김지환 (포항공과대학교 기계공학과) ;
  • 권영삼 (포항공과대학교 기계공학과) ;
  • 김기태 (포항공과대학교 기계공학과)
  • 발행 : 1994.03.01

초록

The creep behavior and creep fracture of alumina at high temperature were investigated under four point flexural test. The steady-state creep behavior was observed at low bending stress and the primary creep until fracture was observed at high bending stress. The loading history of bending stress did not affect on the steady-stated creep rate. Intergranular fracture was dominant for fracture of alumina at room and high temperature. However, transgranular fracture was dominant on creep fracture of alumina under high temperature by nuclueation and growth of microcracks due to residual flaws or cavities in the material.

키워드