Characteristics of Fabricated Devices and Process Parameter Extraction by DTC

DTC에 의한 공정 파라메터 추출 및 제작된 소자의 특성

  • Published : 1993.11.01

Abstract

In this paper, we used one-dimensional process simulator, SUPREM-II, and two-dimensional device simulator, MINIMOS 4.0 to extract optimal process parameter that can minimize degradation of device characteristics caused by process parameter variation in the case of short channel nMOSFET and pMOSFET device. From this simulation, we have derieved the relationship between process parameter and device characteristics. Here we have presented a method to extract process parameters from design trend curve(DTC) obtained by process and device simulations. We parameters to verify the validity of the DTC method. The experimental result of 0.8 $\mu\textrm{m}$ channel length devices that have been fabricated with optimal that reduces short channel effects, that is, good drain current-voltage characteristics, low body effects and threshold voltage of 1.0 V, high punchthrough and breakdown voltage of 12 V, low subthreshold swing(S.S) values of 105 mV/decade.

Keywords