• 한국초전도ㆍ저온공학회논문지
• /
• 제20권2호
• /
• pp.16-19
• /
• 2018

Comprehensive utilization of zinc smelting iron slag not only solves environmental problems but also creates huge economic benefits. This study was conducted on the enrichment and recovery of ${\alpha}-Fe_2O_3$ from zinc smelting iron slag by superconducting HGMS technology. Several variables such as slurry flow velocity, slag concentration, magnetic field intensity and the amount of dispersing agent were tested in magnetic separation. In the experiments, obtained optimal magnetic separation parameters were 1.60 T of magnetic flux intensity, 600 mL/min of slurry flow velocity of, 15 g/L of slag concentration of, 0.10 g/L of dispersing agent. Under this condition, the content of ${\alpha}-Fe_2O_3$ was increased from 86.22% to 94.39% that can approach the Chinese national standard requirements (A level) of iron oxide red. It was concluded that using superconducting HGMS technology was an effective method for the purification of ${\alpha}-Fe_2O_3$ from zinc smelting iron slag.

• 자원리싸이클링
• /
• 제7권2호
• /
• pp.39-45
• /
• 1998

LD 제강 더스트를 제철원료로 LD 전로 제강 슬래그를 용제로 하고 폐타이어에 의해 제조한 건류탄을 환원제로 사용하여 반사로에서 환원 실험하여 배합비, 온도 및 반응시간 변화에 따른 환원율 및 철 회수율의 영향을 조사하여 다음과 같은 결과를 얻을 수 있었다. 1) $1300^{\circ}C$에서 1시간 동안 환원실험한 결과 탈아연율(removal rate of zinc)이 97%이상이며 잔사중의 Zn은 0.1~0.2%이었다. 2)페렛트 중에 LD 스래그 15~20%, 폐타이어 건류탄 4.1~6.7% 함유된 시료를 대기압, $1350^{\circ}C$에서 3시간동안 환원실험한 결과 선철의 회수율은 89.3~92%이었다. 3)환원제련시에 집진장치에서 회수한 더스튼 Zn 60%의 조산화아연이었다. 4) 회수한 선철의 성분은 Fe 96%, C 1.6%, P 0.08%, S 0.05%이었다. 5) 환원시에 생성한 슬래그의 조성은 $Ca_2Al_2SiO_7$, 8CaO $5SiO_2$ 및 $Na_3Ca_6(PO_4)_5$가 확인되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.393-397
• /
• 2001

The innovatory process, that is the direct separation and recovery of the iron and zinc metals contained in the high temperature exhaust gas generated from the electric arc furnace fer the inn scrap melting and/or the dust treatment, has been proposed. This proposed process consists of the moving coke bed filter that is directly connected to the electric furnace, and the following heavy metal condenser. The exhaust gas passes through the filter and the condenser right after exhausting from the electric furnace. The moving coke bed filter is being controlled at about 1000℃ and collects iron and slag components contained in the high temperature exhaust gas. Heavy metals such as zinc and lead pass through the filter as vapor. Based on the thermodynamic considerations, the iron oxide and the zinc oxide are reduced in the filter. The solution loss reaction rate is comparatively low at about 1000℃ in the coke bed filter by the analysis using the mathematical simulation model. The heavy metal condenser is installed in the position after the coke bed filter, and rapidly cools the gas from about 1000℃ to 450℃ by a full of the cooling medium like the solid ceramic ball in addition to the cooling from the wall. The zinc and lead vapor condense and separate f개m the gas in a liquid state. The investigation of the characteristics of the exhaust gas of the commercial electric arc furnace, the fundamental experiments of the laboratory scale and the bench scale ensured the formation of this proposed process. A small-scale pilot plant examination is carrying out at present to confirm the formation of the process. It is certain that the dust generation of the electric arc furnace is extremely decreased, and it can save the energy consumption of usual dust treatment processes by the realization of this process.

• 자원리싸이클링
• /
• 제27권2호
• /
• pp.68-76
• /
• 2018

전기로 제강분진은 아연, 연, 철의 2차자원으로서 매우 중요하다. 또한 제강분진의 리싸이클링은 분진 중에 함유되어 있는 증금속 성분 등의 유해원소에 의한 환경문제의 처리에 유용한 방법이다. 본 조사는 기존의 전기로 제강분진을 처리하는 방법의 개선이나 새로운 처리방법의 개발을 위해 건식처리 방법에 대하여 알아보았다. 상업중인 처리방법은 노의 형상 등에 따라 로터리 킬른형, 회전노상형, 샤프트형, 용융환원로형 등으로 구분할 수 있었다. 이러한 처리에서의 생성물은 ZnO와 환원철 또는 슬래그이다. 제강분진으로부터 ZnO를 만드는 기구는 탄소 열환원과 공기에 의한 아연증기의 산화에 의한 것이다.