• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.390-396
• /
• 2012

In order to understand the nature of dendritic zinc growth, electrochemical zinc redox reaction on nickel plate was investigated in aqueous solutions containing different concentrations, 0.2, 0.1 and 0.02 $mol{\cdot}dm^{-3}$ (M), of zinc sulfate ($ZnSO_4$) or zinc chloride ($ZnCl_2$). Zinc ion was efficiently reduced and oxidized on nickel in the high-concentration (0.2 M) solution, whereas relatively poor efficiency was obtained from the other low-concentration solutions (0,1 and 0.02 M). Cyclic voltammetry (CV) analysis revealed that the 0.2 M electrolyte solution decomposes at more positive potentials than the 0.1 and the 0.02 M solutions. These results suggested that the concentration of electrolyte solution and anion would be an important factor that suppresses the reaction of the zinc dendrite formation. Scanning Electron Microscopy (SEM) data revealed that the shape of dendritic zinc and its growing behavior were also influenced by electrolyte concentration.

• 한국식품조리과학회지
• /
• 제20권2호
• /
• pp.119-125
• /
• 2004

Mixograph를 이용하여 반죽의 물성에 미치는 화학첨가제의 영향을 조사한 결과 ammonium ferric citrate와 ferric sulfate는 0.1% 수준에서는 밀가루 반죽의 탄성에 뚜렷한 영향을 미치지 않았으나, MgSO$_4$, CaCl$_2$ 및 ZnO는 반죽의 탄성을 증가시키며 최적반죽시간을 연장시켜 반죽 시간이 길어졌다. 그러나 Ca과 Mg을 각각 갖는 calcium citrate와 MgCl$_2$는 반죽 시간이나 탄성에 뚜렷한 영향을 나타내지 않았다. 빵의 부피에 미치는 영향은 0.1% MgSO$_4$와 CaCl$_2$가 브롬산 칼륨을 전혀 첨가하지 않은 대조구보다 부피 팽창이 더 커져서 브롬산 칼륨과 같은 팽창제로서의 기능을 확인하였으며, 이들을 첨가한 빵의 속과 겉껍질의 색은 모두 대조구보다 더 밝아서 첨가한 화학첨가제들이 빵의 색을 밝게 하는 것을 확인할 수 있었다. 밀가루의 내재된 효소를 불활성화 시키기 위하여 볶음처리와 UV 및 microwave 조사된 밀가루는 최적 반죽시간을 초과하여 계속 반죽하여도 최적반죽시간 후 반죽의 탄성저하현상이 처리하지 않은 대조구에 비하여 감소되어 반죽의 안정성이 향상되었으나, 열처리한 밀가루로 제조한 빵은 부피가 대조구에 비하여 적었으므로 열처리는 반죽의 안정성은 향상시킬 수는 있으나 빵의 부피 증가에는 효과적이지 못하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1466-1468
• /
• 2001

For the full color organic electro-luminescent device, essentially, red, green, and blue emissions are required. But red emission is not to reach minimum level of practical use 31[lm/W]. In order to optimize color purity and power consumption requirements, it is important for the materials development efforts to search for improvements in red emission effisiency. In this study, the bis(8-oxyquinolino)zinc II ($Znq_2$) were synthesized successfully from zinc chloride($ZnCl_2$) as a initial material. Then, we fabricated red organic electroluminescent device with a dye(DCJTB)-doped and inserted $Znq_2$ between emission layer and cathode layer for increasing EL efficiency. The hole transfer layer is a N,N'-diphenyl-N,N'-bis-(3-methyl phenyl) -1,1'-diphenyl-4.4'-diamine(TPD), and the host material of emission layer is $Znq_2$. For the inserting of $Znq_2$, efficiency increased.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.217-222
• /
• 2012

이산화탄소를 이용하여 디메틸카보네이트(DMC)를 제조하는 반응은 지구온난화 현상의 주요 원인으로 지적되는 이산화탄소의 효율적 전환 방법의 하나로 주목 받고 있다. DMC는 유독한 포스겐과 디메틸슬페이트를 대체하는 반응 매개체, 가솔린 연료 첨가제, 폴리카보네이트 수지의 전구체 등으로 다양하게 활용되고 있다. 본 연구에서는 에틸렌카보네이트(EC)와 메탄올의 에스테르 교환반응에 의한 DMC의 제조 반응에 대하여 이온성 액체와 금속 촉매의 특성을 조사하였다. 촉매 스크리닝 실험 결과 [Choline][OH]와 [BMIm][OH]가 금속염인 MgO, ZnO, CaO보다 더 좋은 촉매 활성을 나타내었다. [Choline][OH] 촉매에 대해서 반응변수인 반응온도, MeOH/EC 몰비, 이산화탄소 압력이 반응에 미치는 영향을 고찰하였다. 반응온도가 높고 MeOH/EC 몰비가 클수록 EC의 전화율이 증가하였다. 그러나 이산화탄소 압력의 영향에서는 1.34 MPa에서 최고의 DMC 수율을 나타내었고 그 이상의 압력에서는 DMC 수율이 오히려 감소하였다. $ZnCl_2$를 조촉매로 사용한 경우 각각 촉매의 활성보다 더 높은 활성을 나타내어 시너지 효과가 관찰되었으며, 이것은 혼합촉매의 산-염기적 특성에 기인하는 것으로 판단된다.

• 한국결정학회지
• /
• 제16권2호
• /
• pp.107-127
• /
• 2005

Five Cu(II) compounds were obtained from different copper salts with btp ligands, and their structures were determined by X-ray crystallography. The structure of coordination polymer 2 contains btp-bridged tetranuclear Cu(II) units weakly connected by nitrate ions, and the structure of a discrete Cu(II) molecule 1 contains acetates and btp ligands. With perchlorate anions, two btp ligands bridge Cu(II) ions to form a double zigzag chain 3, while a single zigzag chain 4 is created with sulfate anions. The reaction of $Cu(NO_{3})_{2}$ containing $NH_{4}PF_{6}$ with btp ligands also produced a polymeric compound 5 containing $Cu(H_{2}O)_{2}^{2+}$ and $Cu(NO_{3})_{2}$ units alternatively bridged by btp ligands with H-bonds between copper bonded water and nitrate oxygen atoms. Five Zn(II) compounds were obtained from different zinc salts with btp ligands, and the structures of polymeric compounds (6, 7 and 8) and monomeric compounds (9 and 10) were determined by X-ray crystallography. With nitrate, chloride and bromide anions, btp ligands bridge Zn(II) ions to form polymeric compounds (6, 7 and 8), but btp ligands coordinate to a Zn(II) ion to form monomeric complexes (9 and 10) with $PF_{6}^{-}$ and perchlorate anions. Four silver salts and btp ligands produced two kinds of structures, dinuclear 20-membered rings and one-dimensional zigzag chain depending on different anions. For $ClO_{4}^{-}$ and OTf anions, weak interactions between Ag(I) and anions make dinuclear 20-membered rings construct polymeric compounds (11 and 13). For $PF_{6}^{-}$ anion, there are also weak interactions between Ag(I) and $F(PF_{6}^{-})(12)$, but they do not construct a polymeric compound. For $O_{2}CCF_{3}^{-}$ anion, btp ligands bridge Ag(I) atoms to make one-dimensional zigzag chain (14), and there are also interactions between Ag(I) and anions.

• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.347-351
• /
• 2013

글리세롤과 요소의 카르보닐화 반응에 의한 글리세롤카보네이트(GC)의 제조반응에 대하여 이온성 액체 촉매의 특성을 조사한 결과 사용된 4급암모늄염 촉매와 이미다졸염 촉매의 알킬기의 길이가 짧을수록, 할로겐 음이온의 친핵성이 클수록 촉매의 활성은 증가하였다. TBAC 촉매에 대해서 반응변수인 반응온도, 반응시간, 진공도가 반응에 미치는 영향을 고찰하였다. $ZnCl_2$를 조촉매로 사용한 경우 각각 촉매의 활성보다 더 높은 활성을 나타내어 시너지 효과가 관찰되었으며, 이것은 혼합촉매의 산-염기적 특성에 기인하는 것으로 판단된다.

• 대한임상검사과학회지
• /
• 제41권3호
• /
• pp.111-122
• /
• 2009

Cadmium (Cd) is known to exert gonadotoxic and spermiotoxic effects. The present study was performed to investigate the morphological effects and metallothionein (MT) expression by zinc pretreatment in the course of time of cadmium-induced testicular injury in rat. Fifty male Spraque-Dawley rats weighing 160~180 g were divided into two groups : saline-pretreated cadmium group and zinc-pretreated cadmium group. Rats of two groups received subcutaneous injection of saline and 100 mg/kg $ZnSO_4$ at 0, 2, 5 and 8 hrs intervals respectively. Cadmium chloride (4.5 mg/kg $CdCl_2$) was administrated intraperitoneally at 2 hrs after zinc injection and rats were killed 0, 12, 24, 48 and 72 hrs later. Testicular tissue damages, interstitial (Leydig) cells status and MT expression were determined using hematoxylin-eosin stained sections and a computerized image analysis system on sections immunostained with a mouse anti-metallothionein respectively. Zinc pretreatment was significantly reduced testicular damages in five pathological categories after cadmium administation. The number of surviving interstitial cells was significantly higher in the zinc-pretreated group than in the saline-preatreated group at 48 and 72 hrs after cadmium administration. Non-damaged testis showed the positivity of MT staining in spermatogenic cells, Sertoli cells and endothelium of blood vessel, but not in the Leydig cells. The positivity of MT staining in saline-pretreated group was significantly reduced at 24 hrs after cadmium administration, whereas zinc-pretreated group showed strong MT positive staining similar to the 0 hr by 42 hrs after cadmium administration. In damaged testis, MT positive staining was also observed in the Leydig cells of both groups. These results suggest that a major preventive effect of zinc against cadmium-induced testicular toxicity may be due to its ability to reduce the cytotoxicity of cadmium in spermatogenic cells and Leydig cells by inhibiting the susceptibility of the testis to cadmium but not MT production by cadmium.

• 대한임상검사과학회지
• /
• 제42권3호
• /
• pp.136-148
• /
• 2010

Cadmium (Cd) is known to exert gonadotoxic and spermiotoxic effects. The present study was performed to investigate the morphological effects and metallothionein (MT) expression by zinc pretreatment in the course of time of cadmium-induced testicular injury in rat. Fifty male Spraque-Dawley rats weighing 160-180 g were divided into two groups: saline-pretreated cadmium group and zinc-pretreated cadmium group. Rats of two groups received subcutaneous injection of saline and 100 mg/kg $ZnSO_4$ at 0, 2, 5 and 8 hrs intervals respectively. Cadmium chloride (4.5 mg/kg $CdCl_2$) was administrated intraperitoneally at 2 hr after zinc injection and rats were killed 0, 12, 24, 48 and 72 hrs later. Testicular tissue damages, Interstitial (Leydig) cells status and MT expression were determined using hematoxylin-eosin stained sections and a computerized image analysis system on sections immunostained with a mouse anti-metallothionein respectively. Zinc pretreatment was significantly reduced testicular damages in five pathological categories after cadmium administation. The number of surviving interstitial cells was significantly higher in the zinc-pretreated group than in the saline-preatreated group at 48 and 72 hrs after cadmium administration. Non-damaged testis showed the positivity of MT staining in spermatogenic cells, Sertoli cells and endothelium of blood vessel, but not in the Leydig cells. The potitivity of MT staining in saline-pretreated group was significantly reduced at 24 hrs after cadmium administration, whereas zinc-pretreated group showed strong MT positive staining similar to the 0 hr by 42 hrs after cadmium administration. In damaged testis, MT positive staining was also observed in the Leydig cells of both groups. These results suggest a major preventive effect of zinc against cadmium-induced testiculat toxicity may be due to its ability to reduce the cytotoxicity of cadmium in spermatogenic cells and Leydig cells by inhibiting the susceptibility of the testis to cadmium but not MT production by cadmium.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.94-100
• /
• 2010

Colored compounds adsorption from the textile dyeing effluents on activated carbons produced from various indigenous vegetable sources by zinc chloride activation is studied. The most important parameters in chemical activation were found to be the chemical ratio of $ZnCl_2$ to feed (3:1), carbonization temperature (460-470 $^{\circ}C$) and time of activation (75 min). The absorbance at 511 nm (red effluent) and 615 nm (blue effluent) are used for estimation of color. It is established that at optimum temperature ($50^{\circ}C$), time of contact (30-40 min) and adsorbent loading (2 g/L), activated carbons developed from rain tree (Samanea saman) saw dust and blackberry (Randia formosa) tree saw dust showed great capability to remove color materials from the effluents. It is observed that adsorption of reactive dyes by all types of activated carbons is more than that of disperse dyes. It is explained that because of its acidic nature the activated carbon can adsorb better reactive dye particles containing large number of nitrogen sites and $-SO_3Na$ group in their structure. The use of activated carbons from the indigenous biomass would be economical, because saw dusts are readily available waste worldwide.

• 공업화학
• /
• 제9권4호
• /
• pp.509-515
• /
• 1998

커피폐기물을 원료로 하여 염화아연으로 화학적 활성화시켜 커피활성탄 (activated coffee char)을 제조하였다. 이 연구는 roasting과정, 탄화과정, 활성화, 그리고 수세 및 건조의 공정으로 수행되었다. Roasting 과정은 $300{\sim}400^{\circ}C$에서 10분간 수행되었다. 탄화과정의 적절한 조건은 $650^{\circ}C$에서 1시간인 것으로 나타났다. 화학적 활성화에 있어서 가장 중요한 parameter는 활성화제와 coffee char의 화학비인 것을 알 수 있었다. $N_2$ gas를 이용하여 77K에서 제조된 커피활성탄의 BET 비표면적과 BJH 세공용적을 측정하였다. 염화아연에 의해 활성화되어 제조된 coffee char의 비표면적이 $1110{\sim}1580m^2/g$로 분석되었으며 세공용적은 $0.51{\sim}0.81cm^3/g$로 각각 분석되었다. SEM은 세공과 coffee char의 표면관찰에 이용되었다. 분석결과, 활성화 표면과 많은 세공이 형성되어 있는 것을 보였다. 커피폐기물을 이용한 activated coffee char의 제조가 성공적으로 수행되었으며, 이는 폐기물을 이용한 자원 개발의 가능성을 보여주었다.